相关论文: A CutFEM method for Stefan-Signorini problems with…
In this paper, a one-phase Stefan-type problem for a semi-infinite material which has as its main feature a variable latent heat that depends on the power of the position and the velocity of the moving boundary is studied. Exact solutions…
The increasing application of cardiorespiratory simulations for diagnosis and surgical planning necessitates the development of computational methods significantly faster than the current technology. To achieve this objective, we leverage…
We introduce a stabilised finite element formulation for the Kirchhoff plate obstacle problem and derive both a priori and residual-based a posteriori error estimates using conforming $C^1$-continuous finite elements. We implement the…
We consider discrete Poisson interface problems resulting from linear unfitted finite elements, also called cut finite elements (CutFEM). Three of these unfitted finite element methods known from the literature are studied. All three…
We present a cut finite element method (CutFEM) for the Laplace--Beltrami equation on a smooth closed curve $\Gamma\subset\mathbb{R}^2$ coupled to a harmonic bulk problem in $\Omega$ that requires \emph{no explicit stabilization}: no ghost…
We propose and analyze computationally a new fictitious domain method, based on higher order space-time finite element discretizations, for the simulation of the nonstationary, incompressible Navier-Stokes equations on evolving domains. The…
The virtual element method (VEM) is a stabilized Galerkin method that is robust and accurate on general polygonal meshes. This feature makes it an appealing candidate for simulations involving meshes with embedded interfaces and evolving…
A new field of numerical astrophysics is introduced which addresses the solution of large, multidimensional structural or slowly-evolving problems (rotating stars, interacting binaries, thick advective accretion disks, four dimensional…
Solving Stefan problems via neural networks is inherently challenged by the nonlinear coupling between the solutions and the free boundary, which results in a non-convex optimization problem. To address this, this work proposes an Operator…
We present and analyze a cut finite element method for the weak imposition of the Neumann boundary conditions of the Darcy problem. The Raviart-Thomas mixed element on both triangular and quadrilateral meshes is considered. Our method is…
This paper studies the characteristics and applicability of the CutFEM approach as the core of a robust topology optimization framework for 3D laminar incompressible flow and species transport problems at low Reynolds number (Re < 200).…
We develop a parametric cut finite element method for elliptic boundary value problems with corner singularities where we have weighted control of higher order derivatives of the solution to a neighborhood of a point at the boundary. Our…
The computational modeling of many engineering problems using the Finite Element method involves the modeling of two or more bodies that meet through an interface. The interface can be physical, as in multi-physics and contact problems, or…
The EMI (Extracellular-Membrane-Intracellular) model describes electrical activity in excitable tissue, where the extracellular and intracellular spaces and cellular membrane are explicitly represented. The model couples a system of partial…
In this paper we present a finite element method (FEM) for two-phase incompressible flows with moving contact lines. We use a sharp interface Navier-Stokes model for the bulk phase fluid dynamics. Surface tension forces, including Marangoni…
In this paper we will discuss different coupling methods {suitable for use in} the framework of the recently introduced CutFEM paradigm, cf. Burman, Erik; Claus, Susanne; Hansbo, Peter; Larson, Mats G.; Massing, Andr\'e . CutFEM:…
The Finite Element Method (FEM) is the gold standard for spatial discretization in numerical simulations for a wide spectrum of real-world engineering problems. Prototypical areas of interest include linear heat transfer and linear…
We present a loosely coupled approach for the solution of fluid-structure interaction problems between a compressible flow and a deformable structure. The method is based on staggered Dirichlet-Neumann partitioning. The interface motion in…
This work presents a reduced order modelling technique built on a high fidelity embedded mesh finite element method. Such methods, and in particular the CutFEM method, are attractive in the generation of projection-based reduced order…
We propose and analyze a new stabilized cut finite element method for the Laplace-Beltrami operator on a closed surface. The new stabilization term provides control of the full $\mathbb{R}^3$ gradient on the active mesh consisting of the…