相关论文: A Topological Kinematic Workspace Analysis of the …
This paper details an accessible geometric derivation of the forward and inverse kinematics of a parallel robotic linkage known as the Canfield joint, which can be used for pointing applications. The original purpose of the Canfield joint…
The paper addresses kinematic and geometrical aspects of the Orthoglide, a three-DOF parallel mechanism. This machine consists of three fixed linear joints, which are mounted orthogonally, three identical legs and a mobile platform, which…
A family of reconfigurable parallel robots can change motion modes by passing through constraint singularities by locking and releasing some passive joints of the robot. This paper is about the kinematics, the workspace and singularity…
The paper addresses kinematic and geometrical aspects of the Orthoglide, a three-DOF parallel mechanism. This machine consists of three fixed linear joints, which are mounted orthogonally, three identical legs and a mobile platform, which…
According to the topological design theory and method of parallel mechanism (PM) based on position and orientation characteristic (POC) equations, this paper studied a 3-DOF translational PM that has three advantages, i.e., (i) it consists…
According to the topological design theory and method of parallel mechanism (PM) based on position and orientation characteristic (POC) equations, this paper design a novel 3-translation (3T) PM that has three advantages, i.e., 1) it…
Presented in this paper is the kinematic analysis of a symmetrical three-degree-of-freedom planar parallel manipulator. In opposite to serial manipulators, parallel manipulators can admit not only multiple inverse kinematic solutions, but…
The paper addresses geometric aspects of a spatial three-degree-of-freedom parallel module, which is the parallel module of a hybrid serial-parallel 5-axis machine tool. This parallel module consists of a moving platform that is connected…
In this paper we combine a survey of the most important topological properties of kinematic maps that appear in robotics, with the exposition of some basic results regarding the topological complexity of a map. In particular, we discuss…
Screw theory provides geometrical insight into the mechanics of rigid bodies. Screw axis is defined as the line coinciding with the joint axis. Line transformations in the form of a screw operator are used to determine the joint axes of a…
The paper derives the inverse and forward kinematic equations of a spatial three-degree-of-freedom parallel mechanism, which is the parallel module of a hybrid serial-parallel 5-axis machine tool. This parallel mechanism consists of a…
Topological techniques are used to study the motions of systems of point vortices in the infinite plane, in singly-periodic arrays, and in doubly-periodic lattices. The reduction of each system using its symmetries is described in detail.…
This paper analyses the workspace of the three-revolute orthogonal manipulators that have at least one of their DH parameters equal to zero. These manipulators are classified into different groups with similar kinematic properties. The…
Linkages are mechanical devices constructed from rigid bars and freely rotating joints studied both for their utility in engineering and as mathematical idealizations in a number of physical systems. Recently, there has been a resurgence of…
A multi-joint enabled robot requires extensive mathematical calculations to determine the end effector's position with respect to the other connective joints involved and their corresponding frames in a specific coordinate system. If a…
An asymmetric two-link robot supported atop a flat platform by wheels that roll and pivot freely, but do not slip laterally, will develop forward momentum if the joint between the links is actuated internally. In particular, oscillations in…
In this paper we give a new control model based on the so called computed-torque method for the control of a 2 degrees of freedom orthosis for the rehabilitation of the lower limb, the AIRGAIT exoskeleton's leg orthosis. The actuation of…
The aim of this paper is to compute of the generalized aspects, i.e. the maximal singularity-free domains in the Cartesian product of the joint space and workspace, for a planar parallel mechanism in using quadtree model and interval…
This paper presents a novel three-degree-of-freedom (3-DOF) translational parallel manipulator (TPM) by using a topological design method of parallel mechanism (PM) based on position and orientation characteristic (POC) equations. The…
In the modern days, manipulators are found in the automated assembly lines of industries that produce products in masses. These manipulators can be used only in one configuration, that is either serial or parallel. In this paper, a new…