相关论文: Electrical and optical properties of ITO thin film…

Bismuth and Nickel transparent oxides thin films were grown on glass and flexible polythelene terephalate (PET) substrates by DC sputtering technique at room temperature 300 K. The structures of Bi2O3 and NiO films were analyzed by X-ray…

The growth and characterization of high quality superconducting thin films is essential for fundamental understanding and also for the use of these films in technological applications. In the present study, Ti40V60 alloy thin films have…

We measure the dynamic properties of $\text{Co}_{25}\text{Fe}_{75}$ thin films grown by dc magnetron sputtering. Using ferromagnetic resonance spectroscopy, we demonstrate an ultralow total damping parameter in the out-of-plane…

Optical properties of refractory intermetallic thin films of Au$_{3}$Zr were experimentally investigated for the first time, which show distinctive plasmonic properties in the visible and near infrared region. The films were fabricated…

Cu doped transparent ZnO thin films were spin coated on conductive glass substrates. The samples were subsequently annealed in air for 1 hour at 500 0C in order to form the phase of ZnO. ZnO samples were doped with different Cu molar…

The experimental research on the nature of diffusion by the Mo substrate atoms into the Ti and Cr deposited thin films is completed by the secondary ion-ion emission method. In [1], the initial stage of the Ti thin film on the Mo substrate…

We have used the classical Hall effect to electrically characterize Indium Tin Oxide (ITO) films grown by two different techniques on silica substrates. ITO films have the unique property that they can be both electrically conducting (and…

Ruthenium dioxide (RuO$_2$) thin films were synthesized by Chemical Solution Deposition (CSD) on silicon substrates using only water and acetic acid as solvents. The microstructure, phase-purity, electrical and optical properties as well as…

In this article, an overview of the fabrication and properties of high quality La0.67Sr0.33MnO3 (LSMO) thin films is given. A high quality LSMO film combines a smooth surface morphology with a large magnetization and a small residual…

The effect of sputtering power ($P$=60 W-180 W) on the electrochromic properties of nickel oxide films deposited on ITO-coated glass substrates by the RF magnetron sputtering technique was investigated. Crystalline structure and morphology…

The transition metal ions doped with TiO2 films are of magnetic properties at room temperatures and have stimulated many scientists to study other properties. The Co-TiO2 sandwich composite films have been recently grown on glass and…

Al2O3 thin films have been deposited at substrate temperatures between 500{\deg}C to 600{\deg}C by reactive magnetron sputtering using an additional arbitrary substrate bias to tailor the energy distribution of the incident ions. The films…

By studying the temperature-dependent behavior of electron thermal conductivity (k) in a 3.2 nm-thin film, we quantify the extremely confined defect-electron scattering and reveal the intrinsic phonon-electron scattering that is shared by…

In this work, the electrical properties of Al2O3 films deposited by reactive ion sputtering were investigated by means of morphological, chemical and electrical characterizations. This insulating layer suffers of an electron trapping that…

Micron-thick boron films have been deposited by Pulsed Laser Deposition in vacuum on several substrates at room temperature. The use of high energy pulses (>700 mJ) results in the deposition of smooth coatings with low oxygen uptake even at…

Indium-tin oxide (ITO) is a crucial functional layer for the optoelectronic applications, such as non-volatile color display thin films based on the ITO/phase-change material (PCM)/ITO/reflective metal multilayer structures on a silicon…

In this Chapter we review our latest results on magnetic (AC susceptibility) and transport (resistivity) properties of Pr1.85Ce0.15CuO4 (PCCO) and Sm1.85Ce0.15CuO4 (SCCO) thin films grown by pulsed laser deposition technique. Three main…

We report the temperature dependence of the infrared-visible conductivity of Pr(2-x)Ce(x)CuO(4) thin films. When varying the doping from a non-superconducting film (x = 0.11) to a superconducting overdoped film (x = 0.17), we observe, up to…

The superconducting nominal "non-doped" $La_{1.85}Y_{0.15}CuO_4$ (LYCO) thin films are successfully prepared by dc magnetron-sputtering and in situ post-annealing in vacuum. The best $T_{C0}$ more than 13K is achieved in the optimal LYCO…

A series of c-axis oriented electron-doped high-Tc superconducting La(2-x)CexCuO4 thin films, from heavily underdoped x=0.06 to heavily overdoped x=0.19, have been synthesized by dc magnetron sputtering technique on (100) SrTiO3 substrates.…