相关论文: Electrical and optical properties of ITO thin film…
Diamond-like carbon thin films have emerged as durable, chemically stable optical coatings for many optical and optoelectronics applications due to their hardness, chemical inertness, and optical transparency. This paper presents a novel…
We report on near normal infrared reflectivity spectra of ~550 nm thick films made of cosputtered transition metal nanograins and SiO2 in a wide range of metal fractions. Co0.85(SiO2)0.15,with conductivity well above the percolation…
The electron dephasing processes in two-dimensional homogeneous and inhomogeneous indium tin oxide thin films have been investigated in a wide temperature range 0.3--90 K. We found that the small-energy-transfer electron-electron ($e$-$e$)…
The effects of 200-MeV Ag^{+15} ion irradiation on the optical properties of TiO_{2} and SnO_{2} thin films prepared by using the RF magnetron sputtering technique were investigated. These films were characterized by using UV-vis…
In terms of mixing graded TiO2 and SnO2 powders by solid-state reaction method, ITO was prepared. Using electron beam gun technology, ITO films with different thicknesses were prepared. The influence of film thickness on structure,…
Advances in opto-electronics are often led by discovery and development of materials featuring unique properties. Recently the material class of transparent conductive oxides (TCO) has attracted attention for active photonic devices…
Brownian thermal noise of thin-film coatings is a fundamental limit for high-precision experiments based on optical resonators such as gravitational-wave interferometers. Here we present the results of a research activity aiming to develop…
Transparent conducting oxides (TCOs) are essential for the optoelectronics industry, but there is a critical gap in cost-effective methods to rapidly deposit low sheet resistance, high transmittance films without damaging delicate…
In this work, we characterized gadolinium oxide films deposited on silicon by high pressure sputtering with a two-step process: first, we sputtered metallic gadolinium in an argon atmosphere and then, we performed an in-situ plasma…
In order to improve the quality of thin film deposition by magnetron discharges, particularly by an effective ionization of the sputtered vapor, we developed an ionized physical vapor deposition method based on pre-ionized pulsed magnetron…
5$\mu$m thick SmCo films were deposited onto Si substrates using triode sputtering. A study of the influence of deposition temperature (Tdep <= 600 degrees C) on the structural, magnetic and mechanical properties has shown that optimum…
We present a theoretical study of electron-phonon scattering effects in thin films made of a strong topological insulator. Phonons are modelled by isotropic elastic continuum theory with stress-free boundary conditions, and the interaction…
Entropy stabilization has garnered significant attention as a new approach to designing novel materials. Much of the work in this area has focused on bulk ceramic processing, leaving entropy-stabilized thin films relatively underexplored.…
A current approach to depositing highly plasmonic titanium nitride films using the magnetron sputtering technique assumes that the process is performed at temperatures high enough to ensure the atoms have sufficient diffusivities to form…
Ta-doped SnO$_2$ films with high conductivity and high optical transparency have been successfully fabricated using rf-sputtering method and their electrical transport properties have been investigated. All films reveal degenerate…
The objective of this work was to study the RF sputtering process parameters optimisation for deposition of Silicon Nitride thin films. The process parameters chosen to be varied were deposition power, deposition duration, flow rate of…
We systematically investigated the temperature behaviors of the electrical conductivity and Hall coefficient of two series of amorphous indium gallium zinc oxides (a-IGZO) films prepared by rf sputtering method. The two series of films are…
SrVO3 (SVO) is a prospective candidate to replace the conventional indium-tin-oxide (ITO) among the new transparent conducting oxide (TCO) generation. In this study, the structural, electrical, and optical properties of SVO thin films, both…
Thin films of the charge-ordered (CO) compound Pr$_{0.5}$Ca$_{0.5}$MnO$_{3}$ have been deposited onto (100)-oriented SrTiO$_{3}$ substrates using the Pulsed Laser Deposition technique. Magnetization and transport properties are measured…
Cr-doped ZnO films were fabricated by a new but feasible method, that is, annealing Cr-Zn layers deposited via DC magnetron sputtering in air. Microstructures of the films were investigated using X-ray diffraction, scanning electron…