相关论文: Modeling of High Composition AlGaN Channel HEMTs w…

Despite considerable advancements, high electron mobility transistors (HEMTs) based on gallium nitride (GaN) channels remain largely limited to power applications below 650 V. For higher power demands, the ultra-wide bandgap semiconductor…

High Electron Mobility Transistors (HEMTs) are most suitable for harsh environments as they operate reliably under extreme conditions such as high voltages, high temperatures, radiation exposure and corrosive atmospheres. In this article,…

In this letter, we report on the theoretical investigations of electron mobility in practically viable designs of InxGa1-xN channel high electron mobility transistors (HEMT). Carriers in such devices are expected to exhibit a higher…

A dual-channel AlN/GaN/AlN/GaN high electron mobility transistor (HEMT) architecture is proposed, simulated, and demonstrated that suppresses gate lag due to surface-originated trapped charge. Dual two-dimensional electron gas (2DEG)…

We report N-polar AlN-based high-electron mobility transistors (HEMTs) with a GaN channel thickness of 5.2 nm on N-polar AlN on sapphire. The threshold voltage is around -2.4 to -3.0 V with saturation currents over 240 mA/mm and on/off…

We report a polarization-induced 2D electron gas (2DEG) at an epitaxial AlBN/GaN heterojunction grown on a SiC substrate. Using this 2DEG in a long conducting channel, we realize ultra-thin barrier AlBN/GaN high electron mobility…

The emerging wide bandgap BAlN alloys have potentials for improved III-nitride power devices including high electron mobility transistor (HEMT). Yet few relevant studies have been carried. In this work, we have investigated the use of the…

A dual-channel AlN/GaN high electron mobility transistor (HEMT) architecture is demonstrated that leverages ultra-thin epitaxial layers to suppress surface-state related gate lag. Two high-density two-dimensional electron gas (2DEG)…

III-V heterostructure based high electron mobility transistors (HEMTs) offer superior performance as compared to CMOS silicon transistors owing to the high mobility in the 2D electron gas (2DEG) channel at the heterostructure interface.…

This paper presents an analysis of GaN high-electron-mobility transistors (HEMTs) using both TCAD simulation and experimental characterization. The energy band structure was studied using Nextnano simulation software to observe…

Scaling down the GaN channel in a double heterostructure AlGaN/GaN/AlGaN High Electron Mobility Transistor (HEMT) to the thicknesses on the order of or even smaller than the Bohr radius confines electrons in the quantum well even at low…

High voltage (~2 kV) AlGaN-channel HEMTs were fabricated with 64% Aluminum composition in the channel. The average on-resistance was ~75 ohm. mm (~21 miliohm. cm^2) for LGD = 20 microns. Breakdown voltage reached >3 kV (tool limit) before…

GaN high electron mobility transistors (HEMT) have gained some foothold in the power electronics industry due to wide frequency bandwidth and power handling. The material offers a wide bandgap and higher critical field strength compared to…

In this paper, physics-based analytical models using two-dimensional (2D) Poisson equations for surface potential, channel potential, electric field, and drain current in AlN/$\beta$-Ga$_2$O$_3$ high electron mobility transistor (HEMT) is…

Galliumnitride has become a strategic superior material for space, defense and civil applications, primarily for power amplification at RF and mm-wave frequencies. For AlGaN/GaN high electron mobility transistors (HEMT), an outstanding…

Aluminum scandium nitride (AlScN) is a promising barrier material for gallium nitride (GaN)-based transistors for the next generation of radio-frequency electronic devices. In this work, we examine the transport properties of two…

Gallium Oxide (Ga2O3) has a huge potential on the power device for its high breakdown filed and good transport properties. beta-Ga2O3 as the thermodynamics stable phase, has been demonstrated to form high electron mobility transistor (HEMT)…

Mechanical transfer of high performing thin film devices onto arbitrary substrates represents an exciting opportunity to improve device performance, explore non-traditional manufacturing approaches, and paves the way for soft, conformal,…

We investigate the influence of AlN buffer thickness on the structural, electrical, and thermal properties of AlGaN/GaN high-electron mobility transistors (HEMTs) grown on semi-insulating SiC substrates by metal-organic chemical vapor…

AlN has the largest bandgap in the wurtzite III-nitride semiconductor family, making it an ideal barrier for a thin GaN channel to achieve strong carrier confinement in field-effect transistors, analogous to silicon-on-insulator technology.…