相关论文: Initial stages of the graphite-SiC(0001) interface…
Graphene films prepared by heating the SiC(000-1) surface (the C-face of the {0001} surfaces) in vacuum or in a Si-rich environment are compared. It is found that different interface structures occur for the two situations. The former…
Graphene films prepared by heating the SiC(000-1) surface (the C-face of the {0001} surfaces) in a Si-rich environment are studied using low-energy electron diffraction (LEED) and low-energy electron microscopy (LEEM). Upon graphitization,…
The morphology of graphene on SiC {0001} surfaces formed in various environments including ultra-high vacuum, 1 atm of argon, and 10^-6 to 10^-4 Torr of disilane is studied by atomic force microscopy, low-energy electron microscopy, and…
The industrial realization of graphene has so far been limited by challenges related to the quality, reproducibility, and high process temperatures required to manufacture graphene on suitable substrates. We demonstrate that epitaxial…
The structure of the SiC(000-1) surface, the C-face of the {0001} SiC surfaces, is studied as a function of temperature and of pressure in a gaseous environment of disilane (Si2H6). Various surface reconstructions are observed, both with…
Cross-sectional transmission electron microscopy (TEM) is used to characterize an amorphous layer observed at the interface in graphite and graphene films grown via thermal decomposition of C-face 4H-SiC. The amorphous layer does not to…
The morphology of graphene formed on the (000-1) surface (the C-face) and the (0001) surface (the Si-face) of SiC, by annealing in ultra-high vacuum or in an argon environment, is studied by atomic force microscopy and low-energy electron…
Graphene is formed on SiC(000-1) surfaces (the so-called C-face of the crystal) by annealing in vacuum, with the resulting films characterized by atomic force microscopy, Auger electron spectroscopy, scanning Auger microscopy and Raman…
This paper reports the synthesis and detailed characterization of graphite thin films produced by thermal decomposition of the (0001) face of a 6H-SiC wafer, demonstrating the successful growth of single crystalline films down to…
The 5x5, 6rt(3)x6rt(3)-R30deg, and graphene-covered 6rt(3)x6rt(3)-R30deg reconstructions of the SiC(0001) surface are studied by scanning tunneling microscopy and spectroscopy. For the 5x5 structure a rich spectrum of surface states is…
An investigation of the early stage formation of graphene on the C-face of 6H-SiC is presented. We show that the sublimation of few atomic layers of Si out of the SiC substrate is not homogeneous. In good agreement with the results of…
The atomic and electronic structures of a graphene layer on top of the $(2\times2)$ reconstruction of the SiC (000$\bar{1}$) surface are studied from ab initio calculations. At variance with the (0001) face, no C bufferlayer is found here.…
The formation of graphene on the (0001) surface of SiC (the Si-face) is studied by atomic force microscopy, low-energy electron microscopy, and scanning tunneling microscopy/spectroscopy. The graphene forms due to preferential sublimation…
Classical molecular-dynamics simulations were carried out to study epitaxial growth of graphene on 6H-SiC(0001) substrate. It was found that there exists a threshold annealing temperature above which we observe formation of graphitic…
The formation of graphene on the SiC(000-1) surface (the C-face of the {0001} surfaces) has been studied, utilizing both disilane and neon environments. In both cases, the interface between the graphene and the SiC is found to be different…
It has been shown that the first C layer on the SiC(0001)(2{\times}2)C surface already exhibits graphene-like electronic structure, with linear pi bands near the Dirac point. Indeed, the (2{\times}2)C reconstruction, with a Si adatom and C…
The evolution in the surface morphology of epitaxial graphene films and 6H-SiC(0001) substrates is studied by electron channeling contrast imaging. Whereas film thickness is determined by growth temperature only, increasing growth times at…
In the recent years graphitization of ion-beam induced amorphous layers became the basic tool for device fabrication in diamond. The etchable graphitic layers can be removed to form free-standing membranes into which the desired structures…
When epitaxial graphene layers are formed on SiC(0001), the first carbon layer (known as the "buffer layer"), while relatively easy to synthesize, does not have the desirable electrical properties of graphene. The conductivity is poor due…
Graphene on SiC intercalated with two-dimensional metal layers, such as Pt, offers a versatile platform for applications in spintronics, catalysis, and beyond. Recent studies have demonstrated that Pt atoms can intercalate at the…