相关论文: Dielectric breakdown in underoxidized magnetic tun…

All-oxide magnetic tunnel junctions (MTJs) incorporating functional materials as insulating barriers have the potential of becoming the founding technology for novel multi-functional devices. We investigate, by first-principles density…

MgO based magnetic tunnel junctions are prepared to investigate the dielectric breakdown of the tunnel barrier. The breakdown is directly visualized by transmission electron microscopy measurements. The broken tunnel junctions are prepared…

Magnetic tunnel junctions for spin-transfer torque switching were prepared to investigate the dielectric breakdown. The breakdown occurs typically at voltages not much higher than the switching voltages, a bottleneck for the implementation…

Surface oxidation of the bottom ferromagnetic (FM) electrode, one of the major detrimental factors to the performance of a Magnetic Tunnel Junction (MTJ), is difficult to avoid during the fabrication process of the MTJ's tunnel barrier.…

We investigate spin-dependent conductance across a magnetic tunnel junction (MTJ) including a ferromagnetic insulating barrier. The MTJ consists of two half-metallic ferromagnetic La2/3Sr1/3MnO3 (LSMO) manganites as electrodes and La2NiMnO6…

In this paper we analyze different contributions to the magnetoresistance of magnetic tunneling junctions at low voltages. A substantial fraction of the resistance drop with voltage can be ascribed to variations of the density of states and…

We fabricate fully epitaxial Fe/ZnO/MgO/Fe magnetic tunnel junctions (MTJs) with a bilayer tunnel barrier, in which ZnO has a metastable rock-salt crystal structure. We observe a high magnetoresistance ratio up to 96% at room temperature…

We study the electro-physical properties of the Fe/MgO/Fe magnetic tunnel junctions (MTJ). Sample structures are fabricated on top of glass-ceramic substrates by e-beam evaporation in a relatively low vacuum (~10^-4 Torr). The influence of…

A new spintronic theory has been developed for the magnetic tunnel junction (MTJ) with single-crystal barrier. The barrier will be treated as a diffraction grating with intralayer periodicity, the diffracted waves of tunneling electrons…

Magnetic tunnel junctions (MTJs), composed of two ferromagnetic electrodes separated by a thin insulating barrier layer, are currently used in spintronic devices, such as magnetic sensors and magnetic random access memories. Recently,…

A ferroelectric tunnel barrier in between two ferromagnetic electrodes (multiferroic tunnel junction, MFTJ), is one of the most promising concepts for future microelectronic devices. In parallel, Hafnia based ferroelectrics are showing…

Spinel MgAl2O4 and family oxides are emerging barrier materials useful for magnetic tunnel junctions (MTJs). We report large tunnel magnetoresistance (TMR) ratios up to 429% at room temperature (RT) and 1,034% at 10 K in a…

Ultra-thin magnetic tunnel junctions with low resistive MgO tunnel barriers are prepared to examine their stability under large current stress. The devices show magnetoresistance ratios of up to 110 % and an area resistance product of down…

We have studied tunnel magnetoresistance (TMR) in junctions with 3d ferromagnetic electrodes. Previously we predicted that defects in the barrier would result in reduced effective polarization P of the impurity assisted current. This is…

We demonstrate that at the usual 1E-7 torr range of base pressures in the sputtering chamber, X-ray photoelectron spectroscopy shows the existence of a thin AlOx layer at the Nb/Al interface in both Nb/Al-AlOx/Pb tunnel junctions and Nb/Al…

In this work we investigate the effect of the mechanical stress on the performance of magnetic tunnel junctions (MTJ) with perpendicular magnetic anisotropy. We developed a 4-point bending setup, that allows us to apply a constant stress…

We experimentally investigate the structural, magnetic and electrical transport properties of La$_{0.67}$Sr$_{0.33}$MnO$_{3}$ based magnetic tunnel junctions with a SrSnO$_3$ barrier. Our results show that despite the large number of…

Magnetite (Fe3O4) based tunnel junctions with turret/mesa structure have been investigated for different barrier materials (SrTiO3, NdGaO3, MgO, SiO2, and Al2O(3-x)). Junctions with a Ni counter electrode and an aluminium oxide barrier…

A magnetic tunnel junction Fe3O4/MgO/Fe with (001) layer orientation is considered. The junction magnetic energy is analyzed as a function of the angle between the layer magnetization vectors under various magnetic fields. The tunnel…

In the quest for reliable and power-efficient memristive devices, ferroelectric tunnel junctions are being investigated as potential candidates. CMOS-compatible ferroelectric hafnium oxides are at the forefront. However, in epitaxial tunnel…