相关论文: High Performance N-Type Carbon Nanotube Field Effe…

High performance p- and n-type single-walled carbon nanotube (SWNT) field-effect transistors (FETs) are obtained by using high and low work function metals, Pd and Al as source/drain (S/D) electrodes respectively. Ohmic contacts made to…

High performance enhancement mode semiconducting carbon nanotube field-effect transistors (CNTFETs) are obtained by combining ohmic metal-tube contacts, high dielectric constant HfO2 films as gate insulators, and electrostatically doped…

Carbon nanotube field-effect transistors (FETs) with passivated coaxial gate structures have been fabricated after growth of contacted suspended single wall nanotubes (SWNTs) and subsequent coating with gate dielectrics. Electron…

Single-walled carbon nanotubes (SWNTs) have been grown via chemical vapor deposition on high-kappa dielectric SrTiO3/Si substrates, and high-performance semiconducting SWNT field-effect transistors have been fabricated using the thin SrTiO3…

State-of-the-art carbon nanotube field-effect transistors (CNFETs) behave as Schottky barrier (SB)-modulated transistors. It is known that vertical scaling of the gate oxide significantly improves the performance of these devices. However,…

We describe a robust technique for the fabrication of high performance vertically scaled n-doped field-effect transistors from large band gap carbon nanotubes. These devices have a tunable threshold voltage in the technologically relevant…

Substantial progress on field effect transistors "FETs" consisting of semiconducting single wall carbon nanotubes "s-SWNTs" without detectable traces of metallic nanotubes and impurities is reported. Nearly perfect removal of metallic…

Most carbon nanotube field-effect transistors (CNTFETs) directly attach metal source/drain contacts to an intrinsic nanotube channel. When the gate oxide thickness is reduced, such transistors display strong ambipolar conduction, even when…

We investigate electronic transport properties of Schottky-barrier field-effect transistors (FET) based on double-walled carbon nanotubes (DWNT) with a semiconducting outer shell and a metallic inner one. These kind of DWNT-FET show…

Junctionless transistors made of silicon have previously been demonstrated experimentally and by simulations. Junctionless devices do not require fabricating an abrupt source-drain junction and thus can be easier to implement in aggressive…

Three-terminal devices with conduction channels formed by quasi-metallic carbon nanotubes (CNT) are shown to operate as nanotube-based field-effect transistors under strong magnetic fields. The off-state conductance of the devices varies…

High-performance single-wall carbon nanotube field-effect transistors (SWNT-FETs) are fabricated using directed assembly and mass-produced carbon nanotubes (CNTs). These FETs exhibit operating characteristics comparable to state-of-the-art…

Networks of semiconducting single-walled carbon nanotubes (SWNTs) are a promising material for thermoelectric energy harvesting due to their mechanical flexibility, solution processability, high Seebeck coefficients and high electrical…

We have fabricated air-stable n-type, ambipolar carbon nanotube field effect transistors (CNFETs), and used them in nanoscale memory cells. N-type transistors are achieved by annealing of nanotubes in hydrogen gas and contacting them by…

Rhodium (Rh) is found similar to Palladium (Pd) in making near-ohmic electrical contacts to single-walled carbon nanotubes (SWNTs) with diameters d > ~ 1.6 nm. Non-negligible positive Schottky barriers (SBs) exist between Rh or Pd and…

In this study, a model of a Schottky-barrier carbon nanotube field- effect transistor (CNT-FET), with ferromagnetic contacts, has been developed. The emphasis is put on analysis of current-voltage characteristics as well as shot (and…

We investigate the properties of conduction electrons in single-walled armchair carbon nanotubes (SWNT) in the presence of both transverse electric and magnetic fields. We find that these fields provide a controlled means of tuning…

We explore the electric-field effect of carbon nanotubes (NTs) in electrolytes. Due to the large gate capacitance, Fermi energy shifts of order +/- 1 V can be induced, enabling to tune NTs from p to n-type. Consequently, large resistance…

Field electron emission (FE) from a structure-defined single-walled carbon nanotube (SWNT) was observed experimentally. A series of observations of the same SWNT by scanning electron microscopy, field emission microscopy and transmission…

As the dimensions of electronic devices approach those of molecules, the size, geometry and chemical composition of the contact electrodes play increasingly dominant roles in device functions. It is shown here that single-walled carbon…