相关论文: Q-Enhanced SH-SAW Ladder Filter in Thin-Film Lithi…

In this work, a 38.7 GHz acoustic wave ladder filter exhibiting insertion loss (IL) of 5.63 dB and 3-dB fractional bandwidth (FBW) of 17.6% is demonstrated, pushing the frequency limits of thin-film piezoelectric acoustic filter technology.…

In this work, we demonstrate a C-band shear-horizontal surface acoustic wave (SH-SAW) resonator with high electromechanical coupling (kt2) of 22% and a quality factor (Q) of 565 based on a thin-film lithium niobate (LN) on silicon carbide…

This paper reports the first piezoelectric acoustic filter in periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) at 23.8 GHz with low insertion loss (IL) of 1.52 dB and 3-dB fractional bandwidth (FBW) of 19.4%. The filter…

Acoustic filters are preferred front-end solutions at sub-6 GHz due to their superior frequency selectivity compared to electromagnetic (EM) counterparts. With the ongoing development of 5G and the evolution toward 6G, there is a growing…

In this work, we investigate the frequency scaling of shear-horizontal (S.H.) surface acoustic wave (SAW) resonators based on a lithium niobate on insulator (LNOI) substrate into the centimeter bands for 6G wireless systems. Prototyped…

This article presents an approach to control the operating frequency and fractional bandwidth (FBW) of miniature acoustic filters in thin-film lithium niobate (TFLN). More specifically, we used first-order antisymmetric (A1) mode…

This work presents the demonstration of lattice filters based on laterally excited bulk acoustic resonators (XBARs). Two filter implementations, namely direct lattice and layout-balanced lattice topologies, are designed and fabricated in…

This paper presents significant frequency scaling of acoustic filter technology to 50 GHz. This achievement is enabled by the P3F LiNbO3 multilayer stack, in which piezoelectric thin-films of alternating orientations are transferred in…

This paper presents surface acoustic wave (SAW) acoustic delay lines (ADL) for studying propagation loss mechanisms in Lithium Niobate (LN). Devices were fabricated by depositing 50 nm aluminum patterns on 600 nm X-Cut LN on amorphous…

This work reports an acoustic filter at 23.5 GHz with a low insertion loss (IL) of 2.38 dB and a 3-dB fractional bandwidth (FBW) of 18.2%, significantly surpassing the state-of-the-art. The device leverages electrically coupled acoustic…

This paper reports the first high-performance acoustic filters toward millimeter wave (mmWave) bands using transferred single-crystal thin film lithium niobate (LiNbO3). By transferring LiNbO3 on the top of silicon (Si) and sapphire (Al2O3)…

Second-harmonic generation (SHG) is a fundamental tool in modern laser technology, enabling coherent frequency conversion to remote optical bands, serving as the basis for self-referenced femtosecond lasers and quadrature-squeezed light…

Compact, high-performance components in millimeter-wave (mmWave) communication systems demand new acoustic filter technology at increasingly higher frequencies. Among various promising mmWave platforms, first-order antisymmetric (A1) mode…

This work reports a 50.74 GHz lithium niobate (LiNbO3) acoustic resonator with a high quality factor (Q) of 237 and an electromechanical coupling (k2) of 5.17% resulting in a figure of merit (FoM, Q x k2) of 12.2. The LiNbO3 resonator…

This paper reports an 11.7 GHz compact 50 ohm ladder filter based on single layer Scandium Aluminum Nitride (ScAlN) film bulk acoustic resonators (FBARs) with platinum (Pt) electrodes, and uses it as a quantitative case study of the limits…

We report a structurally simple double-layer lithium tantalate (LiTaO3) bulk acoustic resonator that enables symmetry-selective excitation of the second-order thickness-shear (SH2) mode with ultrahigh electromechanical coupling. Two 31 deg…

Monolithic integration of multiband (1.4~ 6.0 GHz) RF acoustic devices were successfully demonstrated within the same process flow by using the lithium niobate (LN) thin film on silicon carbide (LNOSiC) substrate. A novel surface mode with…

This letter presents miniature millimeter wave (mmWave, above 30 GHz) acoustic resonators based on a single-layer thin-film lithium niobate (LN) platform. More specifically, we present high performance third-order antisymmetric (A3) mode…

Thin V2O3 films were deposited on a piezoelectric substrate by electron-beam evaporation. Surface acoustic waves (SAW) were generated by interdigital-transducers (IDTs). The attenuation and sound velocity was investigated from 260K to 10K,…

We explore a robust fabrication process for periodically-poled thin-film lithium tantalate (PP-TFLT) by systematically varying fabrication parameters and confirming the quality of inverted domains with second-harmonic microscopy (SHM). We…