相关论文: Low Resistance Ohmic Contact to P-type Monolayer W…

We report a new strategy for fabricating 2D/2D low-resistance ohmic contacts for a variety of transition metal dichalcogenides (TMDs) using van der Waals assembly of substitutionally doped TMDs as drain/source contacts and TMDs with no…

We report high performance p-type field-effect transistors based on single layered (thickness, ~0.7 nm) WSe2 as the active channel with chemically doped source/drain contacts and high-{\kappa} gate dielectrics. The top-gated monolayer…

Two-dimensional (2D) semiconductors, such as the transition metal dichalcogenides, have demonstrated tremendous promise for the development of highly tunable quantum devices. Realizing this potential requires low-resistance electrical…

Tungsten diselenide (WSe$_2$) is a promising p-type semiconductor limited by high contact resistance ($R_\textrm{C}$) and the lack of a reliable doping strategy. Here, we demonstrate that exposing WSe$_2$ to chloroform provides simple and…

Two-dimensional transitional metal dichalcogenide (TMD) field-effect transistors (FETs) are promising candidates for future electronic applications, owing to their excellent transport properties and potential for ultimate device scaling.…

Two-dimensional (2D) semiconductors are likely to dominate next-generation electronics due to their advantages in compactness and low power consumption. However, challenges such as high contact resistance and inefficient doping hinder their…

Low-resistivity metal-semiconductor (M-S) contact is one of the urgent challenges in the research of 2D transition metal dichalcogenides (TMDs). Here, we report a chloride molecular doping technique which greatly reduces the contact…

Electrical contact resistance to two-dimensional (2D) semiconductors such as monolayer MoS_{2} is a key bottleneck in scaling the 2D field effect transistors (FETs). The 2D semiconductor in contact with three-dimensional metal creates…

Formation of low-resistance metal contacts is the biggest challenge that masks the intrinsic exceptional electronic properties of 2D WSe2 devices. We present the first comparative study of the interfacial properties between ML/BL WSe2 and…

In this paper, we report a novel chemical doping technique to reduce the contact resistance (Rc) of transition metal dichalcogenides (TMDs) - eliminating two major roadblocks (namely, doping and high Rc) towards demonstration of…

WSe2 p-MOSFETs with Nb-doped WS2 contacts formed using atomic layer deposition are demonstrated. The devices are fabricated using a technique that aligns the contact metallization with the Nb-doped WS2 contacts using a selective oxidation…

Two-dimensional (2D) materials are highly promising for tunnel field effect transistors (TFETs) with low subthreshold swing and high drive current because the shorter tunnel distance and strong gate controllability can be expected from the…

Single-layer transition metal dichalcogenide (TMD) WSe2 has recently attracted a lot of attention because it is a 2D semiconductor with a direct band-gap. Due to low doping levels it is intrinsic and shows ambipolar transport. This opens up…

Two-dimensional (2D) semiconductors are promising for low-power complementary metal oxide semiconductor (CMOS) electronics, which require ultrathin n- and p-type transistor channels. Among 2D semiconductors, WS2 is expected to have good…

Unlike Si, 2-dimensional (2D) Transition Metal Dichalcogenides (TMDs) offer atomically thin channels for carrier transport in FETs. Despite advantages like superior gate control, steep sub-threshold swing and high carrier mobility offered…

Scalable substitutional doping of two-dimensional (2D) transition metal dichalcogenides (TMDCs) is a prerequisite to developing next-generation logic and memory devices based on 2D materials. To date, doping efforts are still nascent. Here,…

The electrical contact to two-dimensional (2D)-semiconductor materials are decisive to the electronic performance of 2D-semiconductor field-effect devices (FEDs). The presence of a Schottky barrier often leads to a large contact resistance,…

Semiconducting MoTe2 is one of the few two-dimensional (2D) materials with a moderate band gap, similar to silicon. However, this material remains under-explored for 2D electronics due to ambient instability and predominantly p-type Fermi…

High contact resistance remains a central obstacle to the integration of two-dimensional (2D) semiconductors in electronic devices. Recent advances have demonstrated that contact performance can be dramatically improved through interface…

Low-resistance ohmic contacts are a challenge for electronic devices based on two-dimensional materials. We show that an atomically precise junction between a two-dimensional semiconductor and a metallic contact can lead to a…