相关论文: Dynamic Instability of Follower Forced Euler Berno…
We present a mathematical and numerical analysis on a control model for the time evolution of a multi-layered piezoelectric cantilever with tip mass and moment of inertia, as developed by Kugi and Thull [31]. This closed-loop control system…
Euler-Bernoulli beam theory is widely used to successfully predict the linear dynamics of micro- and nano-cantilever beams. However, its capacity to characterize the nonlinear dynamics of these devices has not yet been rigorously assessed,…
A cantilever beam under axial flow, confined or not, is known to develop self-sustained oscillations at sufficiently large flow velocities. In recent decades, the analysis of this archetypal system has been mostly pursued under linearized…
We consider a beam model representing the transverse deflections of a one dimensional elastic structure immersed in an axial fluid flow. The model includes a nonlinear elastic restoring force, with damping and non-conservative terms…
We provide a rigorous mathematical analysis of a coupled system consisting of a floating platform in a fluid of finite depth, clamped to a flexible Euler-Bernoulli beam. The superstructure supports a rigid tip mass at its free end,…
This paper is concerned with the stability analysis of a lossless Euler-Bernoulli beam that carries a tip payload which is coupled to a nonlinear dynamic feedback system. This setup comprises nonlinear dynamic boundary controllers…
A mathematical model of a simply supported Euler-Bernoulli beam with attached spring-mass system is considered. The model is controlled by distributed piezo actuators and lumped force. We address the issue of asymptotic behavior of…
We study the asymptotic behaviour for a system consisting of a clamped flexible beam that carries a tip payload, which is attached to a nonlinear damper and a nonlinear spring at its end. Characterizing the omega-limit sets of the…
Consider a non-uniform Euler-Bernoulli beam with a tip-mass at one end and a cantilever joint at the other end. The cantilever joint is not fixed and can itself be moved along an axis perpendicular to the beam. The position of the…
A system of partial differential equations describing the spatial oscillations of an Euler-Bernoulli beam with a tip mass is considered. The linear system considered is actuated by two independent controls and separated into a pair of…
We investigate the geometrically nonlinear deformation and buckling of a slender elastic beam subject to time-dependent `fictitious' (non-inertial) forces arising from unsteady rotation. Using a rotary apparatus that accurately imposes an…
This work is a theoretical investigation of the stability of the non-linear behavior of an oscillating tip-cantilever system used in dynamic force microscopy. Stability criterions are derived that may help to a better understanding of the…
The linear instability of a beam tensioned by its own weight is considered. It is shown that for long beams, in the sense of an adequate dimensionless parameter, the characteristics of the instability caused by a follower force do not…
The application of variational principles for analyzing problems in the physical sciences is widespread. Cantilever-like problems, where one end is fixed and the other end is free, have received less attention in terms of their stability…
Flutter instability in elastic structures subject to follower load, the most important cases being the famous Beck's and Pfluger's columns (two elastic rods in a cantilever configuration, with an additional concentrated mass at the end of…
We consider a cantilevered (clamped-free) beam in an axial potential flow. Certain flow velocities may bring about a bounded-response instability in the structure, termed {\em flutter}. As a preliminary analysis, we employ the theory of…
The paper is devoted to the observability study of a dynamic system, which describes the vibrations of an elastic beam with an attached rigid body and distributed control actions. The mathematical model is derived using Hamilton's principle…
A pinned-free beam in axial fluid flow, subjected to feedback-based actuation at the pinned end, is investigated. The actuation may be a moment or a prescribed angle and it is proportional to the state (curvature, slope, or displacement) of…
Rotating the clamped ends of a buckled elastica induces a snap-through instability. Predicting the limit point and determining the equilibria at the start and end of the snap are routine computations in the quasi-static setting. The…
Consider a non-uniform Euler-Bernoulli beam with a tip-mass at one end and a cantilever joint at the other end. The cantilever joint is not fixed and can itself be moved along an axis perpendicular to the beam. The position of the…