相关论文: Threshold Voltage Improvement and Leakage Reductio…

We investigated the use of dielectric layers produced by atomic layer deposition (ALD) as an approach to strain mitigation in composite silicon/superconductor devices operating at cryogenic temperatures. We show that the addition of an ALD…

A mechanism of controlling the degree of strain relaxation in GeSn epilayers, grown by molecular beam epitaxy on Ge/Si(001) substrates, is reported in this work. It is demonstrated that by suitably controlling the thickness and the growth…

The cryogenic performance of GaN-based HEMTs (high-electron-mobility transistors) is systematically investigated by the direct current (DC) and low-frequency noise (LFN) characteristics within the temperature (T) range from 300 K to 4.2 K.…

Scaling of GaN high-electron-mobility transistors (HEMTs) usually increases gate leakage current and deteriorates breakdown characteristic, limiting the maximum drain current and output power density. These bottlenecks can be circumvented…

In this work, we propose a new Stepped Oxide Hetero-Material Trench (SOHMT) power MOSFET with three sections in the trench gate (an N+ poly gate sandwiched between two P+ poly gates) and having different gate oxide thicknesses (increasing…

Side and top silicon nitride stressors were proposed and shown to be effective ways to reduce the threshold current Ith and improve the wall-plug efficiency {\eta}wp of Ge-on-Si lasers. Side stressors only turned out to be a more efficient…

Self-heating is a severe problem for high-power GaN electronic and optoelectronic devices. Various thermal management solutions, e.g. flip-chip bonding or composite substrates have been attempted. However, temperature rise still limits…

More than 3 kV breakdown voltage was demonstrated in monolithic bidirectional GaN HEMTs for the first time having potential applications in 1200V or 1700V-class novel power converters. The on resistance of the fabricated transistors was ~20…

The high frequency performance and yield of III-V semiconductor devices such as InP HEMTs is negatively impacted by subsurface etch damage and non-uniform etch depth over the wafer. Atomic layer etching (ALE) has the potential to overcome…

The wide bandgap, high-breakdown electric field, and high carrier mobility makes GaN an ideal material for high-power and high-frequency electronics applications such as wireless communication and radar systems. However, the performance and…

We report on the design and demonstration of ultra-wide bandgap AlGaN polarization-graded field effect transistors with ultra-thin channels to enable excellent current density and high-frequency performance while significantly reducing…

In this paper we report a novel ohmic contact formation scheme for Extreme Bandgap (EBG) AlxGa1-xN (x>0.6) channel HEMTs with undoped barrier layers. Our approach consists of using a new low temperature (LT) pulsed metal-organic chemical…

We present a multi-layer single-event upset mitigation strategy implemented in a low-cost Xilinx Artix-7 FPGA. The implementation is targeted for a trigger data router for the ATLAS muon spectrometer upgrade. The mitigation strategy employs…

The direct integration of GaN with Si can boost great potential for low-cost, large-scale, and high-power device applications. However, it is still challengeable to directly grow GaN on Si without using thick strain relief buffer layers due…

The aim of this work is to present the optimization of the gate trench module for use in vertical GaN devices in terms of cleaning process of the etched surface of the gate trench, thickness of gate dielectric and magnesium concentration of…

We present a novel p-GaN gate HEMT structure with reduced hole concentration near the Schottky interface by doping engineering in MOCVD, which aims at lowering the electric field across the gate. By employing an additional unintentionally…

We report a dramatic current reduction, or a resistance increase, by a few orders of magnitude of two common-anode Au/Ti/pGaN Schottky junctions annealed within a certain annealing condition window (600 - 700 oC, 1 - 4 min). Results from…

In this paper, we report the use of lanthanum (La) in S/D contacts of GaN HEMTs, achieving 0.97 Ohm-mm contact resistance without S/D recess. The HEMTs show well-behaved electrical characteristics and satisfactory reliability. Our studies…

The potential barrier between source and gate in HEMTs and between source and channel in MOSFET controls the current output and the velocity injection of electrons in the channel [1], [2]. In non self aligned structures the electric field…

Thermal transport in high-electron-mobility-transistor (HEMT) structures grown on 4H-SiC substrates by metalorganic-vapour-phase epitaxy (MOCVD) is systematically investigated. The thermal conductivity of the GaN channel and AlN buffer…