相关论文: Structural and electrical properties of CdS thin f…
CdS thin film samples were fabricated using spin coating technique on normal glass and conductive glass substrates and annealed at different temperatures. According to the XRD patterns of films prepared on normal glass substrates,…
Cu added CdS films were synthesized using spin coating technique at different spin speeds for different time durations. Films were subsequently annealed at different temperatures for different time periods in air to crystallize the phase of…
The electrical conductivity of a CdS thin film, controlled by grain structures is essential to enhance its photoconductivity to be able to be fit as a window material in CdS/CdTe heterojunction solar cell. In order to characterize a thin…
We study by photoacoustic spectroscopy the band--gap shift effect of CdS films. The CdS films were grown by chemical bath deposition and exposed to different annealing atmospheres over a range of temperature in which the sample structure is…
Sol-gel spin coating technique was employed to synthesize CuO thin films at 1500 rpm, 2200 rpm and 2400 rpm for 30 seconds, and subsequently annealed at 150-550{\deg}C for 1 hour. Multi-layered CuO thin films with 3 and 5 layers were…
The structure, composition and electrophysical characteristics of low-temperature silicon dioxide films under influence of various technology factors, such as ion implantation, laser irradiation, thermal and photonic annealing, have been…
Zinc telluride (ZnTe) thin films have special semiconducting characteristics that make them very promising for a broad range of optoelectronic applications. In this work, a novel approach for synthesizing ZnTe thin films by spin coating…
Manganese-doped zinc sulfide nanocrystalline thin films were synthesized using a low-temperature chemical bath deposition and deposited on glass substrates for controlled durations using triethanolamine (TEA) as a complexing and capping…
Thin Ba0.5Sr0.5TiO3 (BST) films on p-type Si (100) using The Chemical Solution Deposition (CSD) method. X-ray diffraction (XRD), Scanning electron microscopy (SEM), C-V meter analysis measurement were employed to characterise the films. The…
Spin coating technique was employed to fabricate CuO films at different spin speeds for different time duration, and they were annealed at different temperatures for different time durations in air. These thin films were characterized using…
This work presents a cost-effective alternative technology for the formation of nanostructured semiconductor materials for tunable light emitting devices. CdS and ZnS semiconducting colloid nanoparticles coated with organic shell,…
Thin films of CdTe were deposited on glass substrates by thermal evaporation. From the XRD measurements itis found that the films are of zinc-blende-type structure. Transmittance, absorption, extinction, and refractive coefficients are…
Cd3As2 has long been known as a high-mobility semiconductor. The recent finding of a topological semimetal state in this compound has demanded growth of epitaxial films with high crystallinity and controlled thickness. Here we report the…
We study experimentally the photoconductivity of CdS-CdSe sintered granular films obtained by the screen printing method. We mostly focus on the dependences of photoconductivity on film's microstructure, which varies with changing…
The problem of detecting the ability of some metal oxides as photocatalysts is receiving considerable attention in the world. The studied zinc oxide is considered as one of the most utilized semiconductors, due to its direct band gap of…
Cu doped transparent ZnO thin films were spin coated on conductive glass substrates. The samples were subsequently annealed in air for 1 hour at 500 0C in order to form the phase of ZnO. ZnO samples were doped with different Cu molar…
We deposited thin layers of CdS and ZnS nanoparticles embedded in a thermoplastic cyclo-olephin copolymer (COC) with elevated optical transparency and highly bio-compatible. The nanoparticles were obtained by thiolate precursors previously…
We perform in-situ two-cycle thermal cycling and annealing studies for a transferred CVD-grown monolayer MoS2 on a SiO2/Si substrate, using spatially resolved micro-Raman and PL spectroscopy. After the thermal cycling and being annealed at…
Ruthenium dioxide (RuO$_2$) thin films were synthesized by Chemical Solution Deposition (CSD) on silicon substrates using only water and acetic acid as solvents. The microstructure, phase-purity, electrical and optical properties as well as…
Spin coating technique was used to synthesize pure ZnO and Cu doped ZnO films on amorphous and conducting glass substrates. The doped amount of Cu in ZnO was varied up to 5% in atomic percentage. Speed of spin coating system, coating time,…