相关论文: Electrical and optical properties of ITO thin film…
The transparent and conductive properties of indium tin oxide (ITO) thin films, make them an attractive coating for optically integrated ion traps. However, the relatively low transmittance for wavelengths $<$ 400 nm, high scattering and…
Thin films of inorganic materials as Tin-doped indium oxide, titanium oxide, Niobium doped titanium oxide, were deposited for comparison on glass and Polyethylene terephthalate (PET) substrates with a DC sputtering method. These thin films…
Copper oxide thin films are deposited on quartz substrates by DC magnetron sputtering and the effect of deposition temperature on their optoelectronic properties is examined in detail. Scanning Electron Microscopy (SEM), X-ray diffraction…
In the present work, ultrathin films of Zinc oxide (ZnO) and Aluminum doped zinc oxide (AZO) with 20 nm thick were fabricated at 300 K on glass and Polyethylene terephthalate (PET) substrates by means of directcurrent sputtering method. The…
The synthesis of the photochromic YHO films is based on the oxidation of deposited yttrium hydride in ambient conditions. The actual state of the films during the deposition process, which is influenced by the deposition pressure and the…
RF sputtered ZnO and Al:ZnO films are attractive transparent conductive oxides for fabrication of opto-electronic devices. In this paper we present efforts to control carrier concentration and mobility of ZnO/Al:ZnO thin films by…
Hematite Fe$_2$O$_3$ seed layers are shown to constitute a pathway to prepare highly conductive transparent tin-doped indium oxide (ITO) thin films by room temperature magnetron sputtering. Conductivities of up to $\sigma = 3300\,{\rm…
Absorption of light in superconducting electronics is a major limitation on the quality of circuit architectures that integrate optical components with superconducting components. A 10 nm thick film of a typical superconducting material…
The atomic structure and composition of non-interfacial ITO and ITO-Si interfaces were studied with Transmission Electron Microscopy (TEM) and X-ray Photoelectron Spectroscopy (XPS). The films were deposited by DC magnetron sputtering on…
Indium tin oxide (ITO) film, which is the most commonly used transparent conductive film (TCF), has traditionally been believed to be transparent in the visible spectrum but to reflect infrared (IR) light beyond the plasma wavelength…
Tin doped indium oxide (ITO) thin films are being used extensively as transparent conductors in several applications. In the present communication, we report the electrical transport in DC magnetron sputtered ITO thin films in low…
Transparent conductive indium tin oxide (ITO) thin films, electrochemically intercalated with sodium or other cations, show tunable superconducting transitions with a maximum $T_c$ at 5 K. The transition temperature and the density of…
Al-doped ZnO thin films were deposited using reactive high power impulse magnetron sputtering at substrate temperatures between room temperature and 600 $\bullet$ C. Two sample series with different oxygen partial pressures were studied.…
The magneto-optical activity of high quality transparent thin films of insulating EuTiO3 (ETO) deposited on a thin SrTiO3 (STO) substrate with both being non-magnetic materials are demonstrated to be a versatile tool for light modulation.…
The class of transparent conductive oxides includes the material indium tin oxide (ITO) and has become a widely used material of modern every-day life such as in touch screens of smart phones and watches, but also used as an optically…
Ga2O3 thin films were deposited by reactive magnetron sputtering from a liquid gallium target. The influence of deposition temperature, substrate type, and discharge parameters on the structural and electrical properties was systematically…
The authors have shown that nanogranular indium tin oxide (ITO) films, deposited by spray pyrolysis on silicon substrate, demonstrate ultralow thermal conductivity ~ 0.84 +/-0.12 Wm-1K-1 at room temperature. This value is approximately by…
We investigate selective patterning of ultra-thin 20 nm Indium Tin Oxide (ITO) thin films on glass substrates, using 343, 515, and 1030 nm femtosecond (fs), and 1030 nm picoseconds (ps) laser pulses. An ablative removal mechanism is…
High Frequency (GW) Post Processing of Transparent Conductive Oxide, ITO, leads to a significant improvement of Optical Transmission and Electrical Conduction. This is also true in case of ITO films in multilayered structures. The…
Nickel oxide (NiO) is a binary compound with a lot of applications in the present technology. NiO thin films were deposited by reactive sputtering magnetron under several voltage biases applied in the glass substrates (0, 50, 100, 200, 300,…