相关论文: Phase selection and texturing in molybdenum oxide …
We have grown VO2 thin films by laser ablation for electronic device applications. In obtaining the thin films of the pure VO2 phase, oxygen partial pressure is a critical parameter because vanadium oxides have several phases with the…
Molybdenum carbide (Mo2C) nanoparticles and thin films are particularly suitable catalysts for catalytic fast pyrolysis (CFP) as they are effective for deoxygenation and can catalyze certain reactions that typically occur on noble metals.…
We report the growth of undoped and Fe (2 and 5 at. percentage) doped molybdenum oxide thin films on c-plane of sapphire substrate using pulsed laser ablation. X-ray diffraction results show that the films are oriented in (100) direction…
Two-dimensional MoS2 is a crystalline semiconductor with high potential for numerous technologies. Research in recent years has sought to exploit the direct band gap and high carrier mobility properties of monolayer MoS2 for functional…
We fabricate large-area atomically thin MoS$_2$ layers through the direct transformation of crystalline molybdenum MoS$_2$ (MoO$_3$) by sulfurization at relatively low temperatures. The obtained MoS2 sheets are polycrystalline (~10-20 nm…
The role of stoichiometry and growth temperature in the preferential nucleation of material phases in the Li-Nb-O family are explored yielding an empirical growth phase diagram. It is shown that while single parameter variation often…
Chemically _ driven isothermal close space vapour transport was used to prepare pure MoO2 films which were eventually converted to MoO3 by annealing in air. According to temperature_dependent Raman measurements, the MoO2/MoO3 phase…
We grew highly textured phase pure VO2 thin films on c-plane Al2O3 substrates with different oxygen partial pressure. X-ray absorption and photoemission spectroscopy confirm the identical valence state of vanadium ions despite the different…
The growth of large crystallite continuous monolayer materials like molybdenum disulfide (MoS$_2$) with desired morphology via chemical vapor deposition (CVD) remains a challenge. In CVD, the complex interplay of various factors like growth…
The ability to synthesis well-ordered two-dimensional materials under ultra-high vacuum and directly characterize them by other techniques in-situ can greatly advance our current understanding on their physical and chemical properties. In…
Precise control of the chemical valence or oxidation state of vanadium in vanadium oxide thin films is highly desirable for not only fundamental research, but also technological applications that utilize the subtle change in the physical…
Vanadium dioxide with metal-to-insulator transition (MIT) that is triggered by heat, current or light is a promising material for modern active THz/mid-IR metasurfaces and all-optical big data processing systems. Multilayer VO2-based active…
Growing uniform oxides with various thickness on TMDs is one of the biggest challenges to integrate TMDs into complementary metal oxide semiconductor (CMOS) logic circuits. Here, we report a layer-by-layer oxidation of atomically thin MoTe2…
Owing to the small energy differences between its polymorphs, MoTe2 can access a full spectrum of electronic states, from the 2H semiconducting state to the 1T semimetallic state, and from the Td Weyl semimetallic state to the…
Oxygen-containing yttrium hydride (YHO) and molybdenum trioxide (MoO$_3$) bilayer films (YHO/MoO$_3$) are produced using reactive magnetron sputtering, and their photochromic properties are investigated in relation to the thickness and…
Poly- and single-crystal thin films of U-Mo alloys have been grown both on glass and sapphire substrates by UHV magnetron sputtering. X-ray and Electron Backscatter Diffraction data indicate that for single-crystal U1-xMox alloys, the pure…
MoTe2 is the least explored material in the Molybdenum-chalcogen family, which crystallizes in thermodynamically stable semiconducting 2H phase at \textless 500 C and 1T' metallic phase at higher temperatures. Molecular beam epitaxy (MBE)…
Highly oriented VO2 thin films were grown on sapphire substrates by the sol-gel method that includes a low pressure annealing in an oxygen atmosphere. This reduction process effectively promotes the formation of the VO2 phase over a…
Monolayer MoTe2 exhibits a variety of derivative structural phases and associated novel electronic properties that enable a wealth of potential applications in future electronic and optoelectronic devices. However, a comprehensive study…
The effects of wet chemical processing conventionally employed in device fabrication standards are systematically studied on molybdenum oxide (MoOx) ultra-thin films. We have combined x-ray photoelectron spectroscopy (XPS), angle resolved…