相关论文: ScAlN-on-SiC Ku-Band Solidly-Mounted Bidimensional…
This paper reports on Solidly-Mounted Bidimensional Mode Resonators (S2MRs) utilizing 30% Scandium-doped Aluminum Nitride on Silicon Carbide, operating near 16 GHz. Experimental results show mechanical quality factors up to 380,…
Surface Acoustic Wave (SAW) devices featuring Aluminum Scandium Nitride (AlScN) on a 4H-Silicon Carbide (SiC) substrate, offer a unique blend of high sound velocity, low thermal resistance, substantial piezoelectric response, simplified…
We demonstrate a record-high 62.6 GHz solidly mounted acoustic resonator (SMR) incorporating a 67.6 nm scandium aluminum nitride (Sc0.3Al0.7N) piezoelectric layer on a 40 nm buried platinum (Pt) bottom electrode, positioned above an…
This work reports an acoustic solidly mounted resonator (SMR) at 18.64 GHz, among the highest operating frequencies reported. The device is built in scandium aluminum nitride (ScAlN) on top of silicon dioxide (SiO2) and tantalum pentoxide…
This work describes sputtered scandium aluminum nitride (ScAlN) thin-film bulk acoustic resonators (FBAR) at 12.5 GHz with high electromechanical coupling (k2) of 9.5% and quality factor (Q) of 208, resulting in a figure of merit (FoM, Qk2)…
This work reports on the measured performance of an Aluminum Scandium Nitride (AlScN) Two-Dimensional Resonant Rods resonator (2DRR), fabricated by using a Sc-doping concentration of 24%, characterized by a low off-resonance impedance (~25…
In this work, an Aluminum Scandium Nitride (AlScN) on Diamond Sezawa-mode surface acoustic wave (SAW) platform for RF filtering at Ku-band (12-18 GHz) is demonstrated. Thanks to the high acoustic velocity and low-loss diamond substrate, the…
In this work, we demonstrate a C-band shear-horizontal surface acoustic wave (SH-SAW) resonator with high electromechanical coupling (kt2) of 22% and a quality factor (Q) of 565 based on a thin-film lithium niobate (LN) on silicon carbide…
This work reports on the modeling, fabrication, and experimental characterization of a 13 GHz 30% Scandium-doped Aluminum Nitride (ScAlN) Overmoded Bulk Acoustic Resonator (OBAR) for high-frequency Radio Frequency (RF) applications, notably…
Silicon carbide (SiC) excels in its outstanding mechanical properties, which are widely studied in Microelectromechanical systems (MEMS). Recently, the mechanical tuning of color centers in 4H-SiC has been demonstrated, broadening its…
This work reports a millimeter wave (mmWave) thin-film bulk acoustic resonator (FBAR) in sputtered scandium aluminum nitride (ScAlN). This paper identifies challenges of frequency scaling sputtered ScAlN into mmWave and proposes a stack and…
This work describes sputtered scandium aluminum nitride (ScAlN) thin-film bulk acoustic resonators (FBAR) at millimeter wave (mmWave) with high quality factor (Q) using platinum (Pt) electrodes. FBARs with combinations of Pt and aluminum…
Silicon carbide (SiC) exhibits excellent material properties attractive for broad applications. We demonstrate the first SiC optomechanical microresonators that integrate high mechanical frequency, high mechanical quality, and high optical…
Resonance properties of nanomechanical resonators based on doubly clamped silicon nanowires, fabricated from silicon-on-insulator and coated with a thin layer of aluminum, were experimentally investigated. Resonance frequencies of the…
We report on the fabrication of a Hybrid SAW/BAW resonator made of a thin layer of Sc-doped AlN (AlScN) with a Sc concentration of 40 at% on a 4H-SiC substrate. A Sezawa mode, excited by a vertical electric field, exploits the d31…
This article presents a bulk acoustic wave (BAW) resonator with complementary switchable operation in the first and second thickness extensional modes (TE1 and TE2) at 7.04 and 13.4 GHz. Two ferroelectric scandium aluminum nitride…
This paper presents a comprehensive study of the performance of Sezawa surface acoustic wave (SAW) devices in SweGaN QuanFINE ultrathin GaN/SiC platform, reaching frequencies above 14 GHz for the first time. Sezawa mode frequency scaling is…
We present systematic measurements of the quality factors of surface acoustic wave (SAW) resonators on ST-X quartz in the gigahertz range at a temperature of $10 \, \textrm{mK}$. We demonstrate a internal quality factor $Q_\mathrm{i}$…
We report disk-shaped silicon optomechanical resonators with frequency up to 1.75 GHz in the ultrahigh frequency band. Optical transduction of the thermal motion of the disks' in-plane vibrational modes yields a displacement sensitivity of…
We propose a new label-free ultrasonic sensor, which comprises a slot wave-guide and double silicon-on-insulator (SOI) slot micro-ring resonators. The all-optical sensors do not suffer from electromagnetic interference. We choose to…