相关论文: A flexured-gimbal 3-axis force-torque sensor revea…

This paper proposes a novel method for prevention of the increasing oscillation of an aircraft wing under the flexural torsion flutter. The paper introduces the novel multi-agent method for control of an aircraft wing, assuming that the…

Hovering insects are limited by their physiology and need to rotate their wings at the end of each back and forth motion to keep the wing's leading edge ahead of its trailing edge. The wing rotation at the end of each half-stroke pushes the…

This paper introduces a pair of low-cost, light-weight and compliant force-sensing gripping pads used for manipulating box-like objects with smaller-sized humanoid robots. These pads measure normal gripping forces and center of pressure…

Robotic hands with soft surfaces can perform stable grasping, but the high friction of the soft surfaces makes it difficult to release objects, or to perform operations that require sliding. To solve this issue, we previously developed a…

Tactile sensing can enable robots to perform complex, contact-rich tasks. Magnetic sensors offer accurate three-axis force measurements while using affordable materials. Calibrating such a sensor involves either manual data collection, or…

This work presents an actuation framework for a bioinspired flapping drone called Aerobat. This drone, capable of producing dynamically versatile wing conformations, possesses 14 body joints and is tail-less. Therefore, in our robot, unlike…

Dynamic morphing wing flights present significant challenges in accurately estimating external forces due to complex interactions between aerodynamics, rapid wing movements, and external disturbances. Traditional force estimation methods…

Flapping-wing robots offer significant versatility; however, achieving efficient multi-modal locomotion remains challenging. This paper presents the design, modeling, and experimentation of a novel tailless flapping-wing robot with three…

Compared with fixed-wing flight, flapping flight can generate a higher lift and is also more maneuverable, largely resulting from the benefits of wing rotation. By analyzing the real wing kinematics of fruit flies, we found that the wing…

Aerial robots have garnered significant attention due to their potential applications in various industries, such as inspection, search and rescue, and drone delivery. Successful missions often depend on the ability of these robots to grasp…

Testing the aerodynamics of micro- and nano-UAVs without actually flying is highly challenging. To address this issue, we introduce Open Gimbal, a specially designed 3 Degrees of Freedom platform that caters to the unique requirements of…

Adaptation to external and internal changes is major for robotic systems in uncertain environments. Here we present a novel multisensory active inference torque controller for industrial arms that shows how prediction can be used to resolve…

We investigate the effect of wing twist flexibility on lift and efficiency of a flapping-wing micro air vehicle capable of liftoff. Wings used previously were chosen to be fully rigid due to modeling and fabrication constraints. However,…

Skill transfer from humans to robots is challenging. Presently, many researchers focus on capturing only position or joint angle data from humans to teach the robots. Even though this approach has yielded impressive results for grasping…

Medium and large insects in normal hovering have horizontal, planar up- and downstrokes1-4. The lift of the two half-strokes, generated by the leading-edge vortex, provides the weight-supporting vertical force. But for small insects (wing…

Grasping is an essential capability for most robots in practical applications. Soft robotic grippers are considered as a critical part of robotic grasping and have attracted considerable attention in terms of the advantages of the high…

Sensing contact pressure applied by a gripper can benefit autonomous and teleoperated robotic manipulation, but adding tactile sensors to a gripper's surface can be difficult or impractical. If a gripper visibly deforms, contact pressure…

Due to aerodynamic instabilities, stabilizing flapping flight requires ever-present fast corrective actions. Here we investigate how flies control body roll angle, their most susceptible degree of freedom. We glue a magnet to each fly,…

This paper proposes and validates an in situ calibration method to calibrate six axis force torque (F/T) sensors once they are mounted on the system. This procedure takes advantage of the knowledge of the model of the robot to generate the…

While engineers put lots of effort, resources, and time in building insect scale micro aerial vehicles (MAVs) that fly like insects, insects themselves are the real masters of flight. What if we would use living insect as platform for MAV…