相关论文: Monolithic integration of 940 nm AlGaAs distribute…

High quality n-type AlGaAs distributed Bragg reflectors (DBRs) and lnGaAs multiple quantum wells were successfully monolithically grown on 4-inch off-cut Ge (100) wafers. The grown structures have photoluminescence spectra and reflectance…

High quality AlxGa1-xAs distributed Bragg reflectors (DBRs) were successfully monolithically grown on on-axis Si (100) substrates via a Ge layer formed by aspect ratio trapping (ART) technique. The GaAs/ART-Ge/Si-based DBRs have…

We report the fabrication of monolithically integrated 940 nm AlGaAs distributed Bragg reflectors (DBRs) on graded GaAsP/Si substrates. Low-density surface bumps and cross-hatch patterns were observed on the DBR surfaces. Cross-sectional…

Distributed Bragg reflectors (DBRs) composed of an AlN/AlGaN superlattice were grown of Si (111) substrates. The first high-reflectance III-nitride DBR on Si was achieved by growing the DBR directly on the Si substrate to enhance the…

High-reflectance group III-nitride distributed Bragg reflectors (DBRs) were deposited by MOCVD on Si (111) substrates. A reflectance greater than 96% was demonstrated for the first time for an AlN/GaN DBR with a stop-band centered in the…

Distributed Bragg reflectors (DBRs) composed of an AlN/GaN superlattice were demonstrated for the first time on Si (100) substrates. Single-crystal wurtzite superlattice structures were achieved on this cubic substrate by employing offcut…

We demonstrate epitaxial lattice-matched Al$_{0.89}$Sc$_{0.11}$N/GaN ten and twenty period distributed Bragg reflectors (DBRs) grown on c-plane bulk n-type GaN substrates by plasma-enhanced molecular beam epitaxy (PA-MBE). Resulting from a…

High-reflectivity mirrors in the mid-infrared (MIR) range are essential for next-generation optoelectronic devices but are still constrained by strain accumulation, poor thermal conductivity, and growth instability of thick multi-alloy…

Distributed Bragg Reflectors (DBR) are well-established photonic structures that are used in many photonic applications. However, most of the DBRs are based on different materials or require post-process etching which can hinder integration…

Distributed Bragg reflectors (DBRs) are one of the basic photonic structures used to define microcavities for fundamental light-matter coupling studies, as well as to optimize performance of optoelectronic and photonic devices, e.g., lasers…

Vertical-cavity surface-emitting laser (VCSEL) structures emitting near 940 nm were grown by solid source molecular beam epitaxy (MBE) on Ge(001) substrates. The VCSEL MBE-growth was realized upon a virtual substrate composed of GaAs on Ge…

We present high-performance megahertz micromechanical oscillators based on freestanding epitaxial AlGaAs distributed Bragg reflectors. Compared with dielectric reflectors, the low mechanical loss of the monocrystalline heterostructure gives…

III-V semiconductor quantum dots (QDs) are near-ideal and versatile single-photon sources. Because of the capacity for monolithic integration with photonic structures as well as optoelectronic and optomechanical systems, they are proving…

Distributed bragg reflectors (DBRs) consisting of ZnO and amorphous silicon (a-Si) were prepared by magnetron sputtering method for selective light trapping. The quarter-wavelength ZnO/a-Si DBRs with only 6 periods exhibit a peak…

In-situ measurement is a key feature to better understand and precisely control the growth of complex structures, such as vertical-cavity surface-emitting lasers. In this work, we are showing the precise measurement of optical indices of…

We report on the design, realization and characterization of optically pumped micropillar lasers with low-absorbing Al$_{0.2}$Ga$_{0.8}$As/Al$_{0.9}$Ga$_{0.1}$As dielectric Bragg reflectors (DBRs) instead of commonly used GaAs/AlGaAs DBRs.…

Technological advances in the fabrication of nanophotonic circuits have driven the scientific community to increasingly focus on the precise tailoring of their key optical properties, over a broadband spectral domain. In this context, the…

We present an approach to the molecular-beam epitaxy of high-Q planar GaAs-based microcavities in which the AlGaAs high-index layers of the distributed Bragg reflectors (DBRs) are replaced by short-period GaAs/AlAs superlattices (digital…

The influence of a distributed Bragg reflector composed of ZnTe, MgTe, and MgSe superlattices on photoluminescence of self assembled CdTe quantum dots (QD) emitting in the yellow spectral range is investigated. In the case of QDs grown on a…

Using a custom-built scanning system, we generated maps of birefringence on reflection at $\lambda=1064$~nm from single-crystal GaAs/Al$_{0.92}$Ga$_{0.08}$As Bragg reflectors (henceforth ``AlGaAs coatings''). Ten coatings were bonded to…