相关论文: Theoretical insights for Improving the Schottky-ba…

The Schottky barrier height (SBH) is mapped with nanoscale resolution at pure Au/Si(001) and mixed Au/Ag/Si(001) interfaces utilizing ballistic electron emission microscopy (BEEM) by acquiring and fitting spectra every 11.7 nm over a 1…

This paper reports on the modulation of Schottky barrier heights (SBH) on three different orientations of $\beta$-Ga$_2$O$_3$ by insertion of an ultra-thin SiO$_2$ dielectric interlayer at the metal-semiconductor junction, which can…

The Schottky barrier heights (SBHs) of defect-free interfaces of ZnO, CdO, MgO and SrO with various metals and different terminations are investigated by density functional supercell calculations. The oxide bands are corrected for their…

A low Schottky barrier height (SBH) at source/drain contact is essential for achieving high drive current in atomic layer MoS2 channel based field-effect transistors. Approaches such as choosing metals with appropriate work functions and…

A comprehensive current-voltage (I-V) characterization is performed for three different Schottky contacts; Pt, Ni and Ti, to unintentionally doped (UID) \{beta}-(Al0.19Ga0.81)2O3 grown by molecular beam epitaxy (MBE) on \{beta}-Ga2O3 for…

Accurate prediction of Schottky barrier heights (SBHs) at metal-semiconductor (M-SC) interfaces is essential for understanding and optimizing charge injection in electronic and optoelectronic devices. However, first-principles calculations…

The formation of a Schottky barrier at the interface between a metal and hexagonal boron nitride (h-BN) is studied using density functional theory. For metals whose work functions range from 4.2 to 6.0 eV, we find Schottky barrier heights…

Due to Fermi level pinning (FLP), metal-semiconductor contact interfaces result in a Schottky barrier height (SBH), which is usually difficult to tune. This makes it challenging to efficiently inject both electrons and holes using the same…

Internal photoemission spectroscopy was used to determine the Schottky barrier height in rectifying SrRuO3/Nb-doped SrTiO3 junctions for 0.01 wt % and 0.5 wt % Nb concentrations. Good agreement was obtained with the barrier height deduced…

Graphene interfaced with a semiconductor forms a Schottky junction with rectifying properties, however, fluctuations in the Schottky barrier height are often observed. In this work, Schottky junctions are fabricated by transferring chemical…

We present first-principles calculations of Schottky barrier heights (SBHs) at interfaces relevant for silicon-based merged-element transmon qubit devices. Focusing on Al(111)/Si(111) and CoSi$_2$(111)/Si(111), we consider various possible…

Electrical properties of metal-semiconductor (M/SC) and metal/oxide/SC structures built with Zr or ZrO\_2 deposited on oxygen-terminated surfaces of (001)-oriented diamond films, comprising a stack of lightly p-doped diamond on a heavily…

In order to investigate the interface termination dependence of perovskite band alignments, we have studied the Schottky barrier height at La$_{0.7}$Sr$_{0.3}$MnO$_3$/Nb:SrTiO$_3$ (001) heterointerfaces. As the Nb:SrTiO$_3$ semiconductor…

The Schottky barrier height ($E_{SBH}$) is a crucial factor in determining the transport properties of semiconductor materials as it directly regulates the carrier mobility in opto-electronics devices. In principle, van der Waals (vdW)…

We investigate electron transport across a complex oxide heterointerface of La$_{0.67}$Sr$_{0.33}$MnO$_3$ (LSMO) on Nb:SrTiO$_3$ (Nb:STO) at different temperatures. For this, we employ the conventional current-voltage method as well as the…

An atomistic insight into potential barrier formation and band bending at the interface between a metal and an n-type semiconductor is achieved by ab initio simulations and model analysis of a prototype Schottky diode, i.e., niobium doped…

The thermal stability of most electronic and photo-electronic devices strongly depends on the relationship between Schottky Barrier Height (SBH) and temperature. In this paper, the possible of thermionic current depicted via correct and…

Schottky barrier inhomogeneities are expected at the metal/TMDC interface and this can impact device performance. However, it is difficult to account for the distribution of interface inhomogeneity as most techniques average over the…

We report over 3 kV breakdown voltage and ultra-low leakage (011) \b{eta}-Ga2O3 power devices utilizing Schottky barrier engineering and high-permittivity (\k{appa}) dielectric (ZrO2) field plate. The (011) orientation of \b{eta}-Ga2O3…

The problem of Fermi-level pinning at semiconductor-metal contacts is readdressed starting from first-principles calculations for Al/GaAs. We give quantitative evidence that the Schottky barrier height is very little affected by any…