相关论文: Modification of low-temperature silicon dioxide fi…
The present work is essentially focused on the study of optical and structural properties of hydrogenated amorphous silicon thin films (a-Si:H) prepared by radio-frequency cathodic sputtering. We examine separately the influence of hydrogen…
Superconducting resonators used in millimeter-submillimeter astronomy would greatly benefit from deposited dielectrics with a small dielectric loss. We deposited hydrogenated amorphous silicon films using plasma-enhanced chemical vapor…
CdS samples were synthesized on amorphous glass and conductive glass substrates at room temperature using spin coating technique and subsequently annealed at five different temperatures in air for one hour. The speed and time of spin…
In this work, we characterized gadolinium oxide films deposited on silicon by high pressure sputtering with a two-step process: first, we sputtered metallic gadolinium in an argon atmosphere and then, we performed an in-situ plasma…
Nanocrystals of indium oxide (In$_2$O$_3$) with sizes below 10 nm were prepared in alumina matrixes by using a co-pulverization method. The used substrates such as borosilicate glasses or (100) silicon as well as the substrate temperatures…
Silicon-based dielectric is crucial for many superconducting devices, including high-frequency transmission lines, filters, and resonators. Defects and contaminants in the amorphous dielectric and at the interfaces between the dielectric…
Silicon oxide thin films play an important role in the realization of optical coatings and high-performance electrical circuits. Estimates of the dielectric function in the far- and mid-infrared regime are derived from the observed…
Classical molecular-dynamics simulations have been carried out to investigate densification mechanisms in silicon dioxide thin films deposited on an amorphous silica surface, according to a simplified ion-beam assisted deposition (IBAD)…
CdS thin film samples were fabricated using spin coating technique on normal glass and conductive glass substrates and annealed at different temperatures. According to the XRD patterns of films prepared on normal glass substrates,…
Ruthenium dioxide (RuO$_2$) thin films were synthesized by Chemical Solution Deposition (CSD) on silicon substrates using only water and acetic acid as solvents. The microstructure, phase-purity, electrical and optical properties as well as…
Doping stoichiometric SiNx layers (x=[N]/[Si]=1.33) with Si atoms by ultra-low energy ion implantation (ULE-II) and annealing them at different temperatures can significantly impact the switching characteristics. Electrical characterization…
The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by…
Micron-thick boron films have been deposited by Pulsed Laser Deposition in vacuum on several substrates at room temperature. The use of high energy pulses (>700 mJ) results in the deposition of smooth coatings with low oxygen uptake even at…
Thin gadolinium metallic layers were deposited by high-pressure sputtering in pure Ar atmosphere. Subsequently, in situ thermal oxidation was performed at temperatures ranging from 150 to 750 $^\circ$C. At an oxidation temperature of 500…
Real time electron microscopy observation on morphological changes in gold nano structures deposited on Si (100) surfaces as a function of annealing temperatures has been reported. Two types of interfaces with the substrate silicon were…
We have studied the effects of oxygen on hydrogenated amorphous/crystalline silicon films in terms of their structural and optical properties. Different hydrogenated silicon oxide (SiO:H) and silicon (Si:H) films are fabricated between…
Thin films of superconducting V$_3$Si were prepared by means of RF sputtering from a compound V$_3$Si target at room temperature onto sapphire and oxide-coated silicon wafers, followed by rapid thermal processing under secondary vacuum. The…
Femtosecond pulsed lasers have been widely used over the past decades due to their capability to fabricate precise patterns at the micro- and nano- lengths scales. A key issue for efficient material processing is the determination of the…
Vanadium silicide (V$_3$Si) is a promising superconductor for integration with silicon-based electronics, however the interfacial growth kinetics have a strong influence on the resulting superconducting properties and are not yet fully…
This research for Eco-materials focuses on the improvement of photo response of titania thin films. The goal of this research is to find a suitable substrate for decreasing the band-gap of titania, to improve the microstructure and to seek…