相关论文: Film Coating Process Research and Characterization…
We report a novel method of growing strongly-disordered superconducting titanium nitride (TiN) thin films by reactive electron-beam deposition. The normal state sheet resistance and superconducting critical temperature (Tc) can be tuned by…
The objective of this work was to study the RF sputtering process parameters optimisation for deposition of Silicon Nitride thin films. The process parameters chosen to be varied were deposition power, deposition duration, flow rate of…
This study presents a comprehensive investigation into the exceptional superconducting attributes of titanium nitride (TiN) achieved through plasma-enhanced atomic layer deposition (PEALD) on both planar and intricate three-dimensional (3D)…
We present a systematic study of the properties of TiN films by varying the deposition conditions in an ultra-high-vacuum reactive magnetron sputtering chamber. By increasing the deposition pressure from 2 to 9 mTorr while keeping a nearly…
Thin films of TiN were sputter-deposited onto Si and sapphire wafers with and without SiN buffer layers. The films were fabricated into RF coplanar waveguide resonators, and internal quality factor measurements were taken at millikelvin…
We have grown superconducting TiN films by atomic layer deposition with thicknesses ranging from 6 to 89 nm. This deposition method allows us to tune the resistivity and critical temperature by controlling the film thickness. The microwave…
We have investigated properties of superconducting titanium nitride (TiN) films that were sputtered over a large range of RF-induced DC bias voltage applied to the substrate. Films grown with the largest bias voltages contained cubic TiN…
Sculptured copper thin films were deposited on glass substrates, using different deposition rates. The nano-structure and morphology of the films were obtained, using X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning…
Optimized DC magnetron sputtering system for the deposition of transparent conductive oxides (TCOs), such indium tin oxide (ITO) on glass substrate has been applied in order to achieve low-emitting (low-e) transparent coatings. To obtain…
The deposition of boron-doped amorphous carbon thin films on SiO2 substrate was achieved via a focused ion beam-assisted chemical vapor deposition of triphenyl borane (C18H15B) and triphenyl borate (C18H15BO3). The existence of boron in the…
Hematite Fe$_2$O$_3$ seed layers are shown to constitute a pathway to prepare highly conductive transparent tin-doped indium oxide (ITO) thin films by room temperature magnetron sputtering. Conductivities of up to $\sigma = 3300\,{\rm…
A combinatorial thin-film synthesis approach combined with a high throughput analysis methodology was successfully applied to synthesize TiN/Ni coatings with optimum mechanical properties. The synthesis approach consists of the deposition…
Results on the chemical composition, structure and growth kinetics of titanium nitride (TiN) films deposited on mild steel substrates by pyrolytic laser-induced chemical vapour deposition (LCVD) are presented. Golden coloured lines of TiN…
To integrate plasmonic devices into industry, it is essential to develop scalable and CMOS compatible plasmonic materials. In this work, we report high plasmonic quality titanium nitride (TiN) on c-plane sapphire by plasma enhanced atomic…
We investigate electron transport and phase-breaking processes in thin titanium nitride (TiN) films of epitaxial quality. Previous studies show that a minute surface magnetic disorder significantly reduces the critical temperature…
Refractory metals that can withstand at high temperatures and harsh conditions are of utmost importance for solar-thermal and energy storage applications. Thin films of TiN have been deposited using cathodic vacuum arc deposition (CVA) at…
This work reports a pulsed laser-assisted synthesis, detailed structural characterization, and study of plasmonic properties of three sets of TiN/TiNO thin films with high electron density. The first two sets of TiN films were grown at 600C…
Diamond-like carbon thin films have emerged as durable, chemically stable optical coatings for many optical and optoelectronics applications due to their hardness, chemical inertness, and optical transparency. This paper presents a novel…
Titanium nitride (TiN) presents superior electrical conductivity with mechanical and chemical stability and compatibility with the semiconductor fabrication process. Here, we fabricated epitaxial and polycrystalline TiN (111) thin films on…
This study aims towards a systematic reciprocity of the tunable synthesis parameters - partial pressure of N$_2$ gas, ion energy (\Ei) and Ti interface in TiN thin film samples deposited using ion beam sputtering at ambient temperature…