相关论文: Properties of Pt Schottky Type Contacts On High-Re…
We studied the effects of bulk and surface conductivity on the performance of high-resistivity CdZnTe (CZT) pixel detectors with Pt contacts. We emphasize the difference in mechanisms of the bulk and surface conductivity as indicated by…
Schottky barrier contact has been fabricated by thermal deposition of Al on (100) Ge (impurity concentration~1010/cm3 at 80K) that shows extrinsic p-type to intrinsic n-type transition near 180K. Both p and n-type Ge exhibits ideal Schottky…
The forward and reverse current-voltage characteristics of the Mo/n-Si Schottky barrier structures have been studied experimentally in the temperature range 130-330 K. It is found that Shottky barrier height increases and time ideality…
A comprehensive current-voltage (I-V) characterization is performed for three different Schottky contacts; Pt, Ni and Ti, to unintentionally doped (UID) \{beta}-(Al0.19Ga0.81)2O3 grown by molecular beam epitaxy (MBE) on \{beta}-Ga2O3 for…
In this paper, the electrical behavior of tungsten carbide (WC) Schottky barrier on 4H-SiC was investigated. First, a statistical current-voltage (I-V) analysis in forward bias, performed on a set of equivalent diodes, showed a symmetric…
An attempt to determine theoretically the highly non-linear current-voltage (I-V) characteristics of polycrystalline semiconductors, such as ZnO-based varistors, is made from the electrical properties of individual grain boundaries under dc…
The newly emerging class of atomically-thin materials has shown a high potential for the realisation of novel electronic and optoelectronic components. Amongst this family, semiconducting transition metal dichalcogenides (TMDCs) are of…
We report detector characteristics and background measurements from two prototype imaging CZT detectors flown on a scientific balloon payload in May 2001. The detectors are both platinum-contact 10mm x 10mm x 5mm CZT crystals, each with a 4…
In order to develop a method to extract the parameters of the two inherent Schottky contacts from a single current-voltage (I-V) characteristic curve, the I-V characteristics of metal-semiconductor-metal (MSM) diodes with asymmetric…
GaAs Schottky diode detectors have been fabricated upon Low Pressure Vapour Phase Epitaxial GaAs. The devices were characterised before and after a $1.25 \times 10^{14}$~cm$^{-2}$ 24GeV/c proton fluence. The as fabricated Ti-GaAs barrier…
Current voltage and Kelvin Probe Force Microscopy (KPFM) measurements were performed on single ZnO nanowires. Measurements are shown to be strongly correlated with the contact behavior, either ohmic or Schottky. The ZnO nanowires were…
The low temperature electrical behavior of adjacent silicide/Si Schottky contacts with or without dopant segregation is investigated. The electrical characteristics are very well modeled by thermionic-field emission for non-segregated…
Schottky barriers are often formed at the semiconductor/metal contacts and affect the electrical behaviour of semiconductor devices. In particular, Schottky barriers have been playing a major role in the investigation of the electrical…
The Schottky barrier of a metal-semiconductor junction is one of the key quantities affecting the charge transport in a transistor. The Schottky barrier height depends on several factors, such as work function difference, local atomic…
Understanding of the electrical contact properties of semiconductor nanowire (NW) field effect transistors (FETs) plays a crucial role in employing semiconducting NWs as building blocks for future nanoelectronic devices and in the study of…
To investigate the role of the interface state on the physical properties of Schottky contacts, Co/n-Ge Schottky diodes that have undergone various cleaning methods (HF etching and in-situ thermal cleaning) were studied by Transmission…
Realizing an optimal Schottky interface of graphene on Si is challenging, as the electrical transport strongly depends on the graphene quality and the fabrication processes. Such interfaces are of increasing research interest for…
The Modified Horizontal Bridgman (MHB) process produces Cadmium Zinc Telluride (CZT) crystals with high yield and excellent homogeneity. Various groups,including our own, previously reported on the test of 2x2x0.5 cm3 MHB CZT detectors…
The specific contact resistance $\rho_c$ of Cr/p-Hg$_{0.72}$Cd$_{0.28}$Te and Cr/p-CdTe/p-Hg$_{0.72}$Cd$_{0.28}$Te heterointerfaces, which were formed by deposition of Cr films at room temperatures on the surfaces of semiconductors, was…
We present a novel resistance-compensated I-V method to extract the series resistance, ideality factor, barrier height and built-in potential of a metal-semiconductor diode. We show that a reduced equation arises from a unique but hitherto…