相关论文: Beam Test Results of the BTeV Silicon Pixel Detect…
The silicon pixel vertex detector is one of the key elements of the BTeV spectrometer. Detector prototypes were tested in a beam at Fermilab. We report here on the measured spatial resolution as a function of the incident angles for…
The silicon pixel vertex detector is a key element of the BTeV spectrometer. Sensors bump-bonded to prototype front-end devices were tested in a high energy pion beam at Fermilab. The spatial resolution and occupancies as a function of the…
A Monte Carlo simulation has been developed to predict the spatial resolution of silicon pixel detectors. The results discussed in this paper focus on the unit cell geometry of 50 $\mu$m x 400 $\mu$m, as chosen for BTeV. Effects taken into…
Silicon pixel detectors produced according to the ATLAS Pixel Detector design were tested in a beam at CERN in the framework of the ATLAS collaboration. The detectors used n+/n sensors with oxygenated silicon substrates. The experimental…
BTeV is an approved forward collider experiment at the Fermilab Tevatron dedicated to precision studies of CP violation, mixing, and rare decays of beauty and charmed hadrons. The BTeV detector has been designed to achieve these goals.…
A beam imaging detector was developed by coupling a multi-strip anode with delay line readout to an E$\times$B microchannel plate (MCP) detector. This detector is capable of measuring the incident position of the beam particles in…
Test measurements on the silicon pixel detector for the beam trajectory monitor at the free electron laser of the TESLA test facility are presented. To determine the electronic noise of detector and read-out and to calibrate the signal…
Standard as well as irradiated silicon pixel detectors developed for the ATLAS experiment were tested in a beam. Digital and analog resolutions were determined comparing the positions measured by a microstrip telescope and by the pixel…
A description is given of BTeV, a proposed program at the Fermilab collider sited at the C0 intersection region. The main goals are measurement of mixing, CP violation and rare decays in both the $b$ and charm systems. The detector is a…
Beam tests using tracking telescopes are a standard method for determining the spatial resolution of detectors. This requires the precise knowledge of the position resolution of beam tracks reconstructed at the Device Under Test (DUT). A…
For the purpose of withstanding very high radiation doses, silicon pixel sensors with a 3D electrode geometry are being developed. Detectors of this kind are highly interesting for harch radiation environments such as expected in the High…
We discuss the physics goals and rationale for a detector to study Beauty and Charm decays in the forward direction at the Fermilab Tevatron Collider. We then describe the BTeV detector which has been designed to achieve these goals and…
A collaboration between Fermilab and the Institute for High Energy Physics (IHEP), Beijing, has developed a beam position monitor for the IHEP test beam facility. This telescope is based on 5 stations of silicon strip detectors having a…
Three Gas-Electron-Multiplier tracking detectors with an active area of 10 cm x 10 cm and a two-dimensional, laser-etched orthogonal strip readout have been tested extensively in particle beams at the Meson Test Beam Facility at Fermilab.…
BTeV is a collider experiment at Fermilab designed for precision studies of CP violation and mixing. Unlike most collider experiments, the BTeV detector has a forward geometry that is optimized for the measurement of B and charm decays in a…
BTeV is a $B$-physics experiment that expects to begin collecting data at the C0 interaction region of the Fermilab Tevatron in the year 2006. Its primary goal is to achieve unprecedented levels of sensitivity in the study of CP violation,…
The BTeV experiment is a b-physics experiment designed to conduct precision tests of the CKM description of CP violation and study rare processes involving bottom and charm hadrons. The experiment will be located in the C0 interaction…
A pixelated silicon detector, developed originally for particle physics experiments, was used for a beam profile measurement of a Co-60 irradiator in a water phantom. The beam profile was compared to a profile measured with a pinpoint…
A brief description is given of BTeV a proposed program at the Fermilab collider sited at the C0 intersection region. The main goals are measurement of mixing, CP violation and rare decays in both the $b$ and charm systems. The detector is…
In the context of the studies of the ATLAS High Luminosity LHC programme, radiation tolerant pixel detectors in CMOS technologies are investigated. To evaluate the effects of substrate resistivity on CMOS sensor performance, the H35DEMO…