相关论文: Surface Structuring of Patterned 4H-SiC Surfaces U…

Principal structural defects in graphene layers, synthesized on a carbon-terminated face, i.e. the SiC(000) face of a 4H-SiC substrate, are investigated using microscopic methods. Results of high-resolution transmission electron microscopy…

Concave-shaped 4H-SiC {0001} surfaces have been prepared and reconstructed in pure liquid silicon for investigating the structure and morphology evolution of the SiC surface as a function of both azimuthal and off-axis angles. Different…

The present work illustrates a novel approach for the maskless and resistless fabrication of nanopatterned metal layers on Si substrates, based on the combination of nanomechanical surface modification techniques (such as nanoindentation…

Recently-demonstrated high-quality three-dimensional (3D) subsurface laser processing inside crystalline silicon (c-Si) wafers opens a door to a wide range of novel applications in multidisciplinary research areas. Using this technique, a…

Graphene layers were created on both C and Si faces of semi-insulating, on-axis, 4H- and 6H-SiC substrates. The process was performed under high vacuum (<10-4 mbar) in a commercial chemical vapor deposition SiC reactor. A method for H2…

Scanning tunneling luminescence microscopy (STLM) along with scanning tunneling spectroscopy (STS) is applied to a step-bunched, oxidized 4H-SiC surface prepared on the silicon face of a commercial, n-type SiC wafer using a silicon melt…

Steps with spacings of microns form on top of mesas fabricated on Si(111) that is annealed at temperatures where sublimation becomes important. Upon annealing, mesas first develop ridges along their edges, effectively creating craters which…

Bunching and meandering instability of steps at the 4H-SiC(0001) surface is studied by the kinetic Monte Carlo simulation method. Change in the character of step instability is analyzed for different rates of particle jumps towards step. In…

This paper reports on formation of high aspect micro patterns on low temperature co-fired ceramic (LTCC) substrates by integrating micro inkjetting with electroless plating. Micro inkjetting was realized by using an inkjetting printer that…

We document a sequence of bifurcations and elastic patterns in sheared bent sheets of intermediate aspect ratio. The sheets undergo inversion of curvature through the passage of localized features, often in S-shaped pairs. Nested…

We investigate the effect of SiC stacking on the 4H-SiC/SiO$_2$ interface, both in the presence and absence of O defects, which appear during thermal oxidation, via first principles calculations. It is known that 4H-SiC(0001) has two…

The Si(001) surface subjected to different treatments in ultrahigh vacuum molecular beam epitaxy chamber for SiO$_2$ film decomposition has been in situ investigated by reflected high energy electron diffraction (RHEED) and high resolution…

We report total-energy calculations based on the density-functional theory that clarify microscopic mechanisms of initial stage of graphene formation on the SiC(0001) surface. We explore favorable reactions for desorption of either Si or C…

Engineering surfaces that promote rapid drop detachment is of importance to a wide range of applications including anti-icing, dropwise condensation6, and self-cleaning. Here we show how superhydrophobic surfaces patterned with lattices of…

This letter reports on the femtosecond laser fabrication of gradient-wettability micro/nano- patterns on Si surfaces. The dynamics of directional droplet spreading on the surface tension gradients developed is systematically investigated…

Micro-cantilevers (MCs) are widely used in sensing, probing and a variety of other purposes. Apart from Si, the most versatile material in the micro domain, SiO2 MCs have attracted much attention lately. In this study, fabrication of SiO2…

In recent years, there has been extensive research on planar metasurfaces capable of arbitrarily controlling scattered fields. However, rigorous studies on conformal metasurfaces, such as those that are cylindrical, have been few in number…

The fracture toughness of Al/SiC nanolaminates with different layer thicknesses (in the range 10 to 100 nm) was measured by means of micropillar splitting and bending of a notched beam. The crack plane was perpendicular to the layers in the…

We use kinetic Monte Carlo simulations to understand growth- and etching-induced step bunching of 6H-SiC{0001} vicinal surfaces oriented towards [1-100] and [11-20]. By taking account of the different rates of surface diffusion on three…

Samples of $\alpha$-SiC have been sintered with liquid phase (LPS) to 1950 $^\circ$C, in atmosphere of argon and processing times between 1 and 7 hours. Using scanning electron microscopy (SEM) the microstructure of the samples has been…