相关论文: Analysis and Improvement of Rank-Ordered Mean Algo…

Conventional LIDAR systems require hundreds or thousands of photon detections to form accurate depth and reflectivity images. Recent photon-efficient computational imaging methods are remarkably effective with only 1.0 to 3.0 detected…

This paper proposes a novel method to filter out the false alarm of LiDAR system by using the temporal correlation of target reflected photons. Because of the inevitable noise, which is due to background light and dark counts of the…

We develop a Reduced Order Model (ROM) for a Large Eddy Simulation (LES) approach that combines a three-step algorithm called Evolve-Filter-Relax (EFR) with a computationally efficient finite volume method. The main novelty of our ROM lies…

In this letter, we propose a color-assisted robust framework for accurate LiDAR odometry and mapping (LOAM). Simultaneously receiving data from both the LiDAR and the camera, the framework utilizes the color information from the camera…

The data-driven reduced order models (ROMs) have recently emerged as an efficient tool for the solution of the inverse scattering problems with applications to seismic and sonar imaging. One specification of this approach is that it…

Spatial filtering has been central in the development of large eddy simulation reduced order models (LES-ROMs) and regularized reduced order models (Reg-ROMs), In this paper, we perform a numerical investigation of spatial filtering. To…

Depth estimation is one of the key technologies in some fields such as autonomous driving and robot navigation. However, the traditional method of using a single sensor is inevitably limited by the performance of the sensor. Therefore, a…

We introduce a reduced order model (ROM) methodology for inverse electromagnetic wave scattering in layered lossy media, using data gathered by an antenna which generates a probing wave and measures the time resolved reflected wave. We…

Single-photon light detection and ranging (LiDAR) has been widely applied to 3D imaging in challenging scenarios. However, limited signal photon counts and high noises in the collected data have posed great challenges for predicting the…

We apply reduced-order modeling (ROM) techniques to single-phase flow in faulted porous media, accounting for changing rock properties and fault geometry variations using a radial basis function mesh deformation method. This approach…

Single-photon light detection and ranging (LiDAR) is a key technology for depth imaging through complex environments. Despite recent advances, an open challenge is the ability to isolate the LiDAR signal from other spurious sources…

Standard ROMs generally yield spurious numerical oscillations in the simulation of convection-dominated flows. Regularized ROMs use explicit ROM spatial filtering to decrease these spurious numerical oscillations. The Leray ROM is a…

A nonintrusive model order reduction method for bilinear stochastic differential equations with additive noise is proposed. A reduced order model (ROM) is designed in order to approximate the statistical properties of high-dimensional…

Simultaneous localization and mapping (SLAM) based on laser sensors has been widely adopted by mobile robots and autonomous vehicles. These SLAM systems are required to support accurate localization with limited computational resources. In…

We introduce a novel, computationally inexpensive approach for imaging with an active array of sensors, which probe an unknown medium with a pulse and measure the resulting waves. The imaging function uses a data driven estimate of the…

Single-photon Light Detection and Ranging (LiDAR) systems are often equipped with an array of detectors for improved spatial resolution and sensing speed. However, given a fixed amount of flux produced by the laser transmitter across the…

Median filtering is a non-linear smoothing technique widely used in digital image processing to remove noise while retaining sharp edges. It is particularly well suited to removing outliers (impulse noise) or granular artifacts (speckle…

The a priori error analysis of reduced order models (ROMs) for fluids is relatively scarce. In this paper, we take a step in this direction and conduct numerical analysis of the recently introduced time relaxation ROM (TR-ROM), which uses…

We present a real-time, non-learning depth estimation method that fuses Light Detection and Ranging (LiDAR) data with stereo camera input. Our approach comprises three key techniques: Semi-Global Matching (SGM) stereo with Discrete…

An accurate depth map of the environment is critical to the safe operation of autonomous robots and vehicles. Currently, either light detection and ranging (LIDAR) or stereo matching algorithms are used to acquire such depth information.…