相关论文: Closed-loop Control Design and Motor Allocation fo…
For multi-limbed robots, motion planning with posture and force constraints tends to be a difficult optimization problem due to nonlinearities, which also present extended solve times. We propose a multi-stage optimization framework with…
Objective: Overhead tasks are a primary inducement to work-related musculoskeletal disorders. Aiming to reduce shoulder physical loads, passive shoulder exoskeletons are increasingly prevalent in the industry due to their lightweight,…
Loss of mobility or balance resulting from neural trauma is a critical consideration in public health. Robotic exoskeletons hold great potential for rehabilitation and assisted movement, yet optimal assist-as-needed (AAN) control remains…
An exoskeleton is a wearable electromechanical structure that is intended to resemble and allow movements in a manner similar to the human skeletal system. They can be used by both disabled and able people alike to increase physical…
Legged robots with closed-loop kinematic chains are increasingly prevalent due to their increased mobility and efficiency. Yet, most motion generation methods rely on serial-chain approximations, sidestepping their specific constraints and…
This paper presents an active stabilization method for a fully actuated lower-limb exoskeleton. The method was tested on the exoskeleton ATALANTE, which was designed and built by the French start-up company Wandercraft. The main objective…
Effective rehabilitation methods are essential for the recovery of lower limb dysfunction caused by stroke. Nowadays, robotic exoskeletons have shown great potentials in rehabilitation. Nevertheless, traditional rigid exoskeletons are…
A new approach to the human-robot shared control of the Extra Robotic Legs (XRL) wearable augmentation system is presented. The XRL system consists of two extra legs that bear the entirety of its backpack payload, as well as some of the…
In this paper, an approach for gait assistance with a lower body exoskeleton is described. Two concepts, transparency and motion assistance, are combined. The transparent mode, where the system is following the user's free motion with a…
The use of exoskeleton robots is increasing due to the rising number of musculoskeletal injuries. However, their effectiveness depends heavily on the design of control systems. Designing robust controllers is challenging because of…
This paper concerns the forward kinematics and tension distribution of sinking winches mechanism, which is a type of four-cable-driven partly constrained parallel robot. Conventional studies on forward kinematics of cable-driven parallel…
Robot-assisted therapy can deliver high-dose, task-specific training after neurologic injury, but most systems act primarily at the limb level-engaging the impaired neural circuits only indirectly-which remains a key barrier to truly…
Assistive robotic devices, like soft lower-limb exoskeletons or exosuits, are widely spreading with the promise of helping people in everyday life. To make such systems adaptive to the variety of users wearing them, it is desirable to endow…
Metabolic energy consumption of a powered lower-limb exoskeleton user mainly comes from the upper body effort since the lower body is considered to be passive. However, the upper body effort of the users is largely ignored in the literature…
Lower limb exoskeleton robots hold great potential for rehabilitation, movement assistance, and strength augmentation. Design control to guarantee optimal needed assistance is still a challenge considering the pathological variances between…
Sit-to-Stand (StS) is a fundamental daily activity that can be challenging for stroke survivors due to strength, motor control, and proprioception deficits in their lower limbs. Existing therapies involve repetitive StS exercises, but these…
Pediatric exoskeletons offer great promise to increase mobility for children with crouch gait caused by cerebral palsy. A lightweight, compliant and user-specific actuator is critical for maximizing the benefits of an exoskeleton to users.…
Lower-limb prosthesis wearers are more prone to falling than non-amputees. Powered prostheses can reduce this instability of passive prostheses. While shown to be more stable in practice, powered prostheses generally use model-independent…
Kinematic structure of an exoskeleton is the most fundamental block of its design and is determinant of many functional capabilities of it. Although numerous upper limb rehabilitation devices have been designed in the recent years, there is…
A hierarchical control architecture is presented for energy-efficient control of legged robots subject to variety of linear/nonlinear inequality constraints such as Coulomb friction cones, switching unilateral contacts, actuator saturation…