相关论文: BAlGaN alloys nearly lattice-matched to AlN for ef…

The optical properties of BAlN and BGaN ternary alloys are investigated using first-principle calculation. Hybrid density functional theory is applied to determine the refractive indices of different alloys. A peculiar non-linear behavior…

InGaN-based visible LEDs find commercial applications for solid-state lighting and displays, but lattice mismatch limits the thickness of InGaN quantum wells that can be grown on GaN with high crystalline quality. Since narrower wells…

InGaN light-emitting diodes (LEDs) are more efficient and cost effective than incandescent and fluorescent lighting, but lattice mismatch limits the thickness of InGaN layers that can be grown on GaN without performance-degrading…

Ultra violet light emitting diodes (UV LEDs) face critical limitations in both the injection efficiency and light extraction efficiency due to the resistive and absorbing p-type contact layers. In this work, we investigate the design and…

In this work, we investigate the use of nanoscale polarization engineering to achieve efficient hole injection from metals to ultra-wide band gap AlGaN, and we show that UV-reflective aluminum (Al) layers can be used for hole injection into…

AlGaN plays a vital role in hetero-structure high electron mobility transistor by employing a two-dimensional electron gas and as electron blocking layer in the multi quantum well light emitting diodes. Nevertheless, the incorporation of Al…

Transitioning to solid-state ultraviolet (UV) lighting is critical for reducing global energy utilization to meet net-zero targets. AlGaN-based far-UVC LEDs offer a mercury-free, energy-efficient alternative to conventional mercury lamps,…

Ultra-wide bandgap (UWBG) materials hold immense potential for high-power RF electronics and deep ultraviolet photonics. Among these, AlGaN emerges as a promising candidate, offering a tunable bandgap from 3.4 eV (GaN) to 6.1 eV (AlN) and…

Microcavity polaritons are strongly interacting hybrid light-matter quasiparticles, which are promising for the development of novel light sources and active photonic devices. Here, we report polariton lasing in the UV spectral range in…

Deep ultraviolet (UV) optical emission below 250 nm (~5 eV) in semiconductors is traditionally obtained from high aluminum containing AlGaN alloy quantum wells. It is shown here that high-quality epitaxial ultrathin binary GaN quantum disks…

As UV LEDs are explored at shorter wavelengths (< 280 nm) into the UVC spectral range, the crystalline quality of epitaxial AlGaN films with high Al compositions and inefficient hole injection from p-type AlGaN severely limit the LED…

In the rapidly evolving area of integrated photonics, there is a growing need for materials that satisfy the particular requirements of increasingly complex and specialized devices and applications. Present photonic material platforms have…

AlN is an ultra-wide bandgap semiconductor which has been developed for applications including power electronics and optoelectronics. Thermal management of these applications is the key for stable device performance and allowing for long…

Next-generation high-power radio-frequency (RF) devices increasingly demand transistors that operate efficiently with high gain at high frequencies. High-aluminum-content ultra-wide-bandgap (UWBG) AlGaN alloys have shown great potential for…

We report on the design and demonstration of ultra-wide bandgap AlGaN polarization-graded field effect transistors with ultra-thin channels to enable excellent current density and high-frequency performance while significantly reducing…

A theoretical study of Al(1-x)Ga(x)N, based on full-potential linearized augmented plane wave method, is used to investigate the variations in the bandgap, optical properties and non-linear behavior of the compound with the variation of Ga…

The emerging wide bandgap BAlN alloys have potentials for improved III-nitride power devices including high electron mobility transistor (HEMT). Yet few relevant studies have been carried. In this work, we have investigated the use of the…

BAs is III-V semiconductor with ultra-high thermal conductivity, but many of its electronic properties are unknown. This work applies predictive atomistic calculations to investigate the properties of BAs heterostructures, such as strain…

We report on the illustration of the first electron blocking layer (EBL) free AlInN nanowire light-emitting diodes (LEDs) operating in the deep ultraviolet (DUV) wavelength region (sub-250 nm). We have systematically analyzed the results…

In this work, the energy band structures of BGaN and BAlN alloys are systematically studied through first-principles calculation using HSE hybrid density functional theory by MedeA-VASP. Direct-indirect bandgap transition of BGaN alloys at…