相关论文: Contact resistance between two REBCO tapes under l…

Dynamic resistance occurs in a superconducting tape carrying a dc transport current while being exposed to an alternating magnetic field. This effect is caused by flux movements interacting with the transport current. The dynamic resistance…

A trapped field of over 1 T at 5 K and 0.5 T at 20 K has been measured between a stack of magnetized cylinders of bulk polycrystalline Ba0.6K0.4Fe2As2 superconductors 10 mm in diameter and 18 mm in combined thickness. The trapped field…

Complex magneto structural behaviour of rare rich intermetallic Tb$_3$Co is reported in this study. Below the 84K (T$_N$), it undergoes a first order magnetic transition 72K confirmed from specific heat and magnetization measurements.…

To rectify the problems of electron clouds observed in RHIC and unacceptable ohmic heating for superconducting magnets that can limit future machine upgrades, we started developing a robotic plasma deposition technique for $in-situ$ coating…

Delamination strength of REBCO is very important for its applications in large magnet projects. This work presented the transmission electron microscopy (TEM) investigation of the microstructures of the REBCO coated conductor to understand…

Contact Resistance (RC) is a major limiting factor in the performance of graphene devices. RC is sensitive to the quality of the interface and the composition of the contact, which are affected by the graphene transfer process and contact…

Systematic measurements of stress impedance (SI) and magneto-impedance (MI) have been carried out using Co-rich amorphous ribbons of nominal composition Co71-xFexCr7Si8B14 (x = 0, 2) at various excitation frequencies and bias fields and at…

The authors demonstrate readout of electrically detected magnetic resonance at radio frequencies by means of an LCR tank circuit. Applied to a silicon field-effect transistor at milli-kelvin temperatures, this method shows a 25-fold…

The design, fabrication and performance of an apparatus for the measurement of direct rf power absorption in colossal magnetoresistive (CMR) and superconducting samples are described. The system consists of a self-resonant LC tank circuit…

We report magneto-transport studies of topological insulator Bi_{2}Te_{3} thin films grown by pulsed laser deposition. A non-saturating linear-like magneto-resistance (MR) is observed at low temperatures in the magnetic field range from a…

Radio-frequency integrated sensing and communication (RF-ISAC) is ineffective inunderground, underwater, and in-body environments where conductive media attenuate electromagnetic waves by tens of dB per meter. This article presents…

Magnetization loss on a twisted superconducting (SC) tape in a ramped magnetic field is theoretically investigated through the use of a power law for the electric field--current density characteristics and a sheet current approximation.…

The results of dc, microwave and magnetic measurements of YBCO bicrystal junctions on r-cut sapphire are presented. The junctions with high resistance 10-20 W and IcRN= 1-2 mV and tolerance of RNS around 30% on chip allow to create…

The Twisted Stacked-Tape Cable (TSTC) is one of the major high temperature superconductor cable concepts combining scalability, ease of fabrication and high current density making it a possible candidate as conductor for large scale…

We show that ac magnetoresistance at room temperature in La0.7Sr0.3MnO3 is extremely high (= 47% in H = 100 mT, f = 3-5 MHz), and magnetic field dependence of reactance exhibits a double peak behavior. However, magnitudes of the ac…

Different magnet applications require compact high current cables. Among the proposed solutions, the Twisted Stacked Tape Cable (TSTC) is easy to manufacture and has very high tape length usage efficiency. In this kind of cables the tapes…

This paper focuses on designing new motors with high torque density, which is crucial for applications ranging from electric vehicles to robotics. We propose a double-teeth C-core switched reluctance motor with hybrid excitation,…

In the last 10-15 years, the most common strategy in the development of High Temperature Superconducting (HTS) cable for magnets has been to imitate Low Temperature Superconducting (LTS) cable designs. However, requirements for LTS…

BaZrO3 (BZO) nanorods are now incorporated into production IBAD-MOCVD coated conductors. Here we compare several examples of both BZO-free and BZO-containing coated conductors using critical current (Ic) characterizations at 4.2 K over…

The recently discovered iron-based superconductors with very high upper critical field and small anisotropy have been regarded as a potential candidate material for high field applications. However, enhancements of superconducting…