相关论文: Thin Film growth of Solid State materials

Copper ferrite thin films were deposited on amorphous quartz substrates. The as deposited films were annealed in air and either quenched or slow cooled. Magnetization studies were carried out on the as deposited as well as annealed films…

Surface-patterned ZnO thin films were fabricated by direct imprinting on ZnO sol and subsequent annealing process. The polymer-based ZnO sols were deposited on various substrates for the nanoimprint lithography and converted to…

Practical applications of nanocrystalline metallic thin films are often limited by instabilities. In addition to grain growth, the thin film itself can become unstable and collapse into islands through solid-state dewetting. Selective…

Titanium dioxide is one of the most widely used wide bandgap materials. However, the TiO2 deposited on a substrate is not always transparent leading to a loss in efficiency of the device, especially, the photo response. Herein, we show that…

The obtention of quantum-grade rare-earth doped oxide thin films that can be integrated with optical cavities and microwave resonators is of great interest for the development of scalable quantum devices. Among the different growth methods,…

An unusual growth mechanism of metastable zincblende AlN thin film by diffusion of nitrogen atoms into Al lattice is established. Using first-principles density functional theory, we studied the possibility of thermodynamic stability of AlN…

For the first time it is shown that for thin metallic films thickness of which not exceed thickness of skin -- layer, the problem of description of surface plasma oscillations allows analytical solution by arbitrary ratio between length of…

Soft ferromagnetic NiFe thin films are promising for applications in spintronic devices because of their constituent electrical and magnetic properties. Electron beam evaporation and sputtering techniques have been used to deposit NiFe thin…

Silicene, a new two-dimensional (2D) material has attracted intense research because of the ubiquitous use of silicon in modern technology. However, producing free-standing silicene has proved to be a huge challenge. Until now, silicene…

Transparent pure and Cu-doped (2.5, 5 and 10 at. %) anatase TiO2 thin films were grown by pulsed laser deposition technique on LaAlO3 substrates. The samples were structurally characterized by X-ray absorption spectroscopy and X-ray…

This paper reports the study of growth kinetics of ion beam sputtered aluminum thin films. Dynamic scaling theory was used to derive the kinetics from AFM measurements. AFM imaging revealed that surface incorporates distinctly different…

Thin films of the prototypical charge transfer insulator NiO appear to be a promising material for novel nanoelectronic devices. The fabrication of the material is challenging however, and mostly a p-type semiconducting phase is reported.…

The influence of the buffer layer of hafnia dielectric on superconducting properties of niobium nitride films, produced by the technique of the reactive magnetron depositing has been investigated for the first time. This study presents a…

There is a demand for the manufacture of ultra low-loss metallic films with high-quality single crystals and surface for quantum optics and quantum information processing. Many researches are devoted to alternative materials, but silver is…

Spray deposition and inkjet printing of various nanostructures are emerging complementary methods for creating conductive coatings on different substrates. In comparison to established deposition techniques like vacuum metal coating and…

1.8 micrometer-thick magnesium hydride films were synthesized in a single-step process by reactive plasma-assisted sputtering. The MgH2 thin films, which were deposited on two types of flexible surfaces (namely graphite and polyimide foils)…

(111)NiO epitaxial layers are grown on c-sapphire substrates by pulsed laser deposition (PLD) technique. Structural and morphological properties of the films are studied using in-plane as well as out-of-plane high resolution X-ray…

A detailed nanoscale structural characterization was performed on high-quality La0.66Sr0.33MnO3 (LSMO) thin films of different thicknesses and deposited by pulsed laser deposition onto buffered Si (100) substrates. A multilayered structure…

We report the uniaxial anisotropic optical constants of Wurtzite type AlN films deposited on Si (100) substrate using DC reactive magnetron sputtering as a function of growth temperature (Ts, 35 to 600 C). Evolution of optical properties…

Pb(Zr0.52Ti0.48)O3 (PZT) thin films were in situ deposited by pulsed laser deposition (PLD) on Pt/Ti/SiO2/Si substrates using a template layer derived by sol-gel method. A 0.1-$\mu$m-thick PZT layer with (111) or (100)-preferred orientation…