相关论文: Characterization of a flat superpolished mandrel p…
The LAMP (Lightweight Asymmetry and Magnetism Probe) X-ray telescope is a mission concept to measure the polarization of X-ray astronomical sources at 250 eV via imaging mirrors that reflect at incidence angles near the polarization angle,…
We report on the first experimental realization of multi-material dielectric mirror coatings designed through a multi-objective optimization algorithm to simultaneously minimize thermal noise and optical losses. We validate this design…
We have developed X-ray telescope mirrors using an original electroforming replication technique established through the fabrication of millimeter-aperture, ultra-short-focal-length nanofocusing mirrors for synchrotron X-ray microscopy.…
Silicon nanostructuring imparts unique material properties including antireflectivity, antifogging, anti-icing, self-cleaning, and/or antimicrobial activity. To tune these properties however, a good control over features size and shape is…
This study presents a comprehensive investigation into the exceptional superconducting attributes of titanium nitride (TiN) achieved through plasma-enhanced atomic layer deposition (PEALD) on both planar and intricate three-dimensional (3D)…
In the era of high-angular resolution astronomical instrumentation, where long and very long baseline interferometers (constituted by many, $\sim$ 20 or more, telescopes) are expected to work not only in the millimeter and submillimeter…
A combinatorial thin-film synthesis approach combined with a high throughput analysis methodology was successfully applied to synthesize TiN/Ni coatings with optimum mechanical properties. The synthesis approach consists of the deposition…
Future hard (10 -100 keV) X-ray telescopes (SIMBOL-X, Con-X, HEXIT-SAT, XEUS) will implement focusing optics with multilayer coatings: in view of the production of these optics we are exploring several deposition techniques for the…
Nanoimprint lithography (NIL) is an attractive nonconventional lithographic technique in the fabrication of superconducting nanowires for superconducting nanowire single-photon detectors (SNSPDs) with large effective detection areas or…
Classical methods for X-ray computed tomography are based on the assumption that the X-ray source intensity is known, but in practice, the intensity is measured and hence uncertain. Under normal operating conditions, when the exposure time…
Simbol-X will push grazing incidence imaging up to 80 keV, providing a strong improvement both in sensitivity and angular resolution compared to all instruments that have operated so far above 10 keV. The superb hard X-ray imaging…
Nanophotonic devices offer an unprecedented ability to concentrate light into small volumes which can greatly increase nonlinear effects. However, traditional plasmonic materials suffer from low damage thresholds and are not compatible with…
Nickel carbon based multi-layers are a viable route towards future hard X-ray and soft $\gamma$-ray focusing telescopes. Here, we study the Pulsed Laser Deposition growth conditions of such bilayers by Reflective High Energy Electron…
We deposit thin titanium-nitride (TiN) and TiN/Ti/TiN multilayer films on sapphire substrates and measure the reflectance and transmittance in the wavelength range from 400 nm to 2000 nm using a spectrophotometer. The optical constants…
We apply the superconducting proximity effect in TiN/Ti multi-layer films to tune the critical temperature, Tc, to within 10 mK with high uniformity (less than 15 mK spread) across a 75 mm wafer. Reproducible Tc's are obtained from 0.8 -…
Multilayer X-ray mirrors consist of a coating of a large number of alternate layers of high Z and low Z materials with a typical thickness of 10-100 Angstrom, on a suitable substrate. Such coatings play an important role in enhancing the…
X-ray Multi-Mirror Mission (XMM-Newton) has been one of the most successful astronomy missions launched by the European Space Agency. It exploits innovative use of replication technology for the X-ray reflecting telescopes that has resulted…
We discuss the magnetic and topological properties of bulk crystals and quasi-two-dimensional thin films formed by stacking intrinsic magnetized topological insulator ( for example Mn(Sb$_{x}$Bi$_{1-x}$)$_2$X$_4$ with X = Se,Te, including…
Optical metasurfaces, consisting of subwavelength-scale meta-atom arrays, hold great promise to overcome fundamental limitations of conventional optics. Scalable nanomanufacturing of metasurfaces with high uniformity and reproducibility is…
To enhance the reflectivity of X-ray mirrors beyond the critical angle, multilayer coatings are required. Interface imperfections in the multilayer growth process are known to cause non-specular scattering and degrade the mirror optical…