相关论文: Structural characterization of as-deposited cesium…
The present work investigates the morphological, micro-structural, compositional and fractal analysis for CsI thin films in case of "as-deposited" and "1 hour humid air aged". The variation of grain sizes obtained from transmission electron…
Structural and optical studies have been performed on the thermally-evaporated "as-deposited" and "humid air aged" CsI thin films. The structural analysis for both "as-deposited" and "humid air aged" films shows a well-oriented peaks…
Pulsed laser deposition from a Nd:YAG laser was employed in production of hundreds of nanometer thick quasicrystalline Ti-Zr-Ni films on glass substrate. The influence of deposition temperature Ts on the structure, morphology and…
In the present work performance of cesium iodide thin film photocathode is studied in detail. The optical absorbance of cesium iodide thin films have been analyzed in the spectral range of 190 nm to 900 nm. The optical band gap energy of…
Ni thin films grown by thermal evaporation and sputtering under different deposition conditions are characterized for structural and morphological properties using X-ray diffraction (XRD) and atomic force microscopy (AFM) techniques. XRD…
Classical molecular-dynamics simulations have been carried out to investigate densification mechanisms in silicon dioxide thin films deposited on an amorphous silica surface, according to a simplified ion-beam assisted deposition (IBAD)…
In this article, we report the process induced variation in the characteristics of PECVD deposited and thermally grown silicon dioxide (SiO2) thin film. We find key differences in the porosity, arrangement of the nano-pores, surface…
We report on sexithiophene films, about 150nm thick, grown by thermal evaporation on single crystal oxides and, as comparison, on Si/SiO2. By heating the entire deposition chamber at 100 C we obtain standing-up oriented molecules all over…
Tetragonal Mn$_x$Ga$_{1-x}$ (x=0.70, 0.75) thin films grown on SrTiO$_3$ substrates at different temperatures and thicknesses exhibit perpendicular magnetic anisotropy with coercive fields between 1-2 T. Transmission electron microscopy…
Thin films of cerium dioxide (CeO2) were deposited by atomic layer deposition (ALD) at 250 {\deg}C on both Si and TiN substrates. The ALD growth produces CeO2 films with polycrystalline cubic phase on both substrates. However, the films…
Amorphous silicon films prepared by electron beam evaporation have systematically and substantially greater atomic density for higher thickness, higher growth temperature, and slower deposition rate, reaching the density of crystalline Si…
W-SiC composite material is a promising plasma-facing material candidate alternative to pure W due to the low neutron activation, low impurity radiation, and low tritium diffusivity of SiC while leveraging the high erosion resistance of the…
SiC fibre with the transverse isotropic properties is very important to it reinforced metal matrix composites. In this paper, local texture of the CVD SiC fibre was investigated by means of X-ray diffraction (XRD) and precession electron…
Thin Ba0.5Sr0.5TiO3 (BST) films on p-type Si (100) using The Chemical Solution Deposition (CSD) method. X-ray diffraction (XRD), Scanning electron microscopy (SEM), C-V meter analysis measurement were employed to characterise the films. The…
The thermal deposition and transfer Printing method had been used to produce pentacene thin-films on SiO2/Si and plastic substrates (PMMA and PVP), respectively. X-ray diffraction patterns of pentacene thin films showed reflections…
The microstructure of electrodeposited Ni films produced without and with organic additives (saccharin and formic acid) was investigated by X-ray diffraction (XRD) line profile analysis and cross-sectional transmission electron microscopy…
The deposition of atomically thin highly uniform chemically derived graphene (CDG) films on 300 mm SiO2/Si wafers is reported. We demonstrate that the very thin films can be lifted off to form uniform membranes than can be free-standing or…
Herein, we report CeIrIn5 thin-film growth on a MgF2 (001) substrate using pulsed laser deposition technique. X-ray diffraction analysis showed that the thin films were either mainly a-axis-oriented (TF1) or a combination of a- and…
The residual stress plays a vital role in determination of the device performance that uses thin films coating and thus the accurate determination of stress and its optimization with process parameters is an ongoing research work for many…
Amorphous thin film superconductors are promising alternatives for the development of superconducting radiation detectors, especially superconducting nanowire single photon detectors (SNSPDs) and superconducting microwire single photon…