相关论文: Low Resistance GaN/InGaN/GaN Tunnel Junctions
The magnetic tunnel junction is a cornerstone of spintronic devices and circuits, providing the main way to convert between magnetic and electrical information. In state-of-the-art magnetic tunnel junctions, magnesium oxide is used as the…
The photovoltaic properties of (0001) n-InGaN/p-GaN single heterojunctions were investigated numerically and compared with those of conventional p-GaN/i-InGaN/n-GaN structures, employing realistic material parameters. This alternative…
We propose and analize a graphene tunneling transit time device based on a heterostructure with a lateral p-i-n junction electrically induced in the graphene layer by the applied gate voltages of different polarity. The depleted i-section…
We have successfully fabricated Cu/AlOx-Al/Nb normal-metal/insulator/superconductor tunnel junction devices with a high value of the superconducting gap (up to $\sim 1$ mV), using electron-beam lithography and angle evaporation techniques…
We have fabricated a device which includes two lateral p-n junctions on an n-type GaAs/Al$_{0.33}$Ga$_{0.67}$As heterostructure. A section of the n-type material has been converted to p-type by removing dopants and applying a voltage to a…
Blue light-emitting diodes (LEDs) consisting of a buried n+-p+ GaN tunnel junction, (In,Ga)N multiple quantum wells (MQWs) and a n+-GaN top layer are grown on single-crystal Ga-polar n+-GaN bulk wafers by plasma-assisted molecular beam…
High quality epitaxial graphene films can be applied as templates for tailoring graphene-substrate interfaces that allow for precise control of the charge carrier behavior in graphene through doping and many-body effects. By combining…
Better wall plug efficiency of deep-ultraviolet light emitting diodes (DUV-LEDs) requires simultaneous low resistivity p-type and n-type contacts, which is a challenging problem. In this study, the co-optimization of p-InGaN and n- AlGaN…
We have investigated metallic break junctions of the heavy-fermion compound UPd2Al3 at low temperatures between 0.1K and 9K and in magnetic fields up to 8T. Both the current-voltage I(V) characteristics and the dV/dI (V) spectra clearly…
We demonstrate that GaN formed in a Nanowall Network (NwN) morphology can overcome fundamental limitations in optoelectronic devices, and enable high light extraction and effective Mg incorporation for efficient p-GaN. We report the growth…
We design and demonstrate selective injection GaN heterojunction bipolar transistors that utilize a patterned base for selective injection of electrons from the emitter. The design maneuvers minority carrier injection through a thin p-GaN…
As the characteristic dimensions of modern top-down devices are getting smaller, such devices reach their operational limits given by quantum mechanics. Thus, two-dimensional (2D) structures appear as one of the best solutions to meet the…
The absence of a band-gap in graphene limits the gate modulation of its electron conductivity, both in regular graphene as well as in PN junctions, where electrostatic barriers prove transparent to Klein tunneling. We demonstrate a novel…
We present a hybrid light-emitting diode structure composed of an n-type gallium nitride nanowire on a p-type silicon substrate in which current is injected along the length of the nanowire. The device emits ultraviolet light under both…
High quality Au/hBN/Au tunnel devices are fabricated using transferred atomically thin hexagonal boron nitride as the tunneling barrier. All tunnel junctions show tunneling resistance on the order of several k$\Omega$/$\mu$m$^{2}$. Ohmic…
We report on the fabrication and measurement of a graphene tunnel junction using hexagonal-boron nitride as a tunnel barrier between graphene and a metal gate. The tunneling behavior into graphene is altered by the interactions with phonons…
In this paper we demonstrate experimentally the implementation of a niobium-trilayer junction with an aluminum-oxide tunnel barrier, embedded in a high-gap superconducting niobium-titanium-nitride circuit. Previously reported heating by…
We have fabricated graphene devices with a top gate separated from the graphene layer by an air gap--a design which does not decrease the mobility of charge carriers under the gate. This gate is used to realise p-n-p structures where the…
Superconducting tunnel junctions are being developed for application as photon detectors in astronomy. We present the latest results on the development of very high quality, very low critical temperature junctions, fabricated out of pure Al…
This letter presents experiments on junctions fabricated by a new technique that enables the use of high quality aluminum oxide tunnel barriers with normal metal electrodes at low temperatures. Inverse proximity effect is applied to…