相关论文: Oxidation effects on graded porous silicon anti-re…

Theoretically and experimentally we have proved the existence of optimal thickness of the porous layer used as an anti-reflection coating in solar cells. We have taken into account the joint mechanisms of generation and recombination of…

Porous silicon (PSi) layers has been prepared in this work via photoelectrochemical (PEC) etching process of an n type silicon wafers of two resistivities (3.5 ohm.cm and 0.02 ohm.cm) in hydrofluoric (HF) acid of 24.5 precent…

Porous silicon layers (PS) have been prepared in this work via Photoelectrochemical etching process (PEC) of n type silicon wafer of 0.8 ohm.cm resistivity in hydrofluoric (HF) acid of 24.5 precent concentration at different etching times…

Surface anti-reflectance and passivation properties of the Al2O3 films deposited on crystalline Si substrates by atomic layer deposition are investigated. Textured Si with 100 nm Al2O3 shows a very low average reflectance of ~2.8 %. Both…

The diffusion of substrate material into absorbing layer and oxidation of metal substrate or cermet metal nanoparticles at high temperatures are known as inevitable problems of the solar selective absorbers. In this study, we consider the…

Silicon optics with wide bandwidth anti-reflection (AR) coatings, made of multi-layer textured silicon surfaces, are developed for millimeter and submillimeter wavelengths. Single and double layer AR coatings were designed for an optimal…

Anti-reflective coatings (ARCs) are used on the vast majority of solar photovoltaic (PV) modules to increase power production. However, ARC longevity can vary from less than 1 year to over 15 years depending on coating quality and…

Within this work, the kinetics of the growing stage of porous silicon (PS) during the etching process was studied using the photoacoustic technique. A p-type Si with low resistivity was used as a substrate. An extension of Rosencwaig and…

Silicon (Si) nanoparticles (NPs) were synthesized by transforming Si wafer surface to ammonium silicon hexafluoride (ASH) or (NH4)2SiF6 under acid vapor treatment. Si-NPs are embedded within the polycrystalline (ASH) layer formed on the Si…

The problem of determining the porous silicon (PSi) optical constants, thickness, porosity, and surface quality using just reflectance data is board employing evolutionary algorithms. The reflectance measurements were carried out of PSi…

There are two main physical properties needed to fabricate 1D photonic structures and form perfect photonic bandgaps: the quality of the thickness periodicity and the refractive index of their components. Porous silicon (PS) is a…

Recent progress in the development of high-power mid-IR laser sources and the exciting laser driven physical phenomena associated with the irradiation of solids via ultrashort laser pulses in that spectral region are aimed to potentially…

The increasing scale of cryogenic detector arrays for sub-millimeter and millimeter wavelength astrophysics has led to the need for large aperture, high index of refraction, low loss, cryogenic refracting optics. Silicon with n = 3.4, low…

Surface enhanced Raman spectroscopy (SERS) was used to probe the surface chemistry of chlorine-terminated silicon nanocrystal (Si-NC) surfaces in an air-free environment. SERS effect was observed from the thin films of Ag$_x$O using 514 nm…

The present work is essentially focused on the study of optical and structural properties of hydrogenated amorphous silicon thin films (a-Si:H) prepared by radio-frequency cathodic sputtering. We examine separately the influence of hydrogen…

Silica aerogels are nanoporous materials with exceptional optical and physical properties, making them promising candidates to enhance solar cell efficiency as antireflective coatings. This study synthesized hydrophobic silica aerogel thin…

In this article, we investigate the effect of prolonged light exposure on silicon heterojunction solar cells. We show that, although light exposure systematicallyimproves solar cell efficiency in the case of devices using intrinsic and…

We observed and studied strong reduction of optical reflection from the surface of InP wafers after high-temperature annealing. The effect is observed over a wide range of the incident wavelengths, and in the transparency band of the…

We describe measurements of the X-ray reflectance in the range 2 to 10 keV of samples representative of coated silicon wafers that are proposed for the fabrication of the XEUS (X-ray Evolving Universe Spectrometer) mission. We compare the…

We have developed and tested an antireflection (AR) coating method for silicon lenses at cryogenic temperatures and millimeter wavelengths. Our particular application is a measurement of the cosmic microwave background. The coating consists…