相关论文: Controlled oxygen vacancy induced p-type conductiv…
We demonstrate the tunability of oxygen content in pulsed laser deposition (PLD)-grown barium stannate (BaSn$O_3$, BSO) thin films by precisely controlling the background oxygen pressure over a broad range from 0.0004 mbar to 0.13 mbar. The…
We report the growth of ultrathin VO$_{2}$ films on rutile TiO$_{2}$ (001) substrates via reactive molecular-beam epitaxy. The films were formed by the cyclical deposition of amorphous vanadium and its subsequent oxidation and…
Low resistivity (~3-24 mOhm.cm) with tunable n- and p-type phase pure Cu2O thin films have been grown by pulsed laser deposition at 25-200 0C by varying the background oxygen partial pressure (O2pp). Capacitance data obtained by…
Native point defects, defect complexes, and oxygen impurities in BaCuChF were studied using density functional theory calculations, self-consistent thermodynamic simulations, and various experimental techniques. Unintentional p-type…
We report on a systematic study of the temperature-dependent Hall coefficient and thermoelectric power in ultra-thin metallic LaNiO$_3$ films that reveal a strain-induced, self-doping carrier transition that is inaccessible in the bulk. As…
Single phase, c-axis oriented, e-doped, Sr1-xLaxCuO2 thin films were epitaxially grown on KTaO3 and DyScO3 substrates by reactive rf sputtering. As-grown films being insulating due to oxygen excess, oxygen reduction is necessary to observe…
BiFeO3 thin films epitaxially grown on SrRuO3-buffered (001)-oriented SrTiO3 substrates show orthogonal bundles of twin domains, each of which contains parallel and periodic 71o domain walls. A smaller amount of 109o domain walls are also…
One of the basic assumptions in organic field-effect transistors, the most fundamental device unit in organic electronics, is that charge transport occurs two-dimensionally in the first few molecular layers near the dielectric interface.…
TiO$_{2-\delta}$ films were deposited on (100) Lanthanum aluminates LaAlO$_{3}$ substrates at a very low oxygen chamber pressure $P\approx 0.3$ mtorr employing a pulsed laser ablation deposition technique. In previous work, it was…
We studied the influence of oxygen on the electronic trap states in a pentacene thin film. This was done by carrying out gated four-terminal measurements on thin-film transistors as a function of temperature and without ever exposing the…
Room temperature ferromagnetism is observed in undoped TiO2 films deposited on Si substrates using pulsed laser deposition (PLD). The ferromagnetic properties of the samples depend on the oxygen partial pressure during the PLD synthesis.…
The origin of p-type conductivity and the mechanism responsible for low carrier mobility was investigated in pyrite (FeS2) thin films. Temperature dependent resistivity measurements were performed on polycrystalline and nanostructured thin…
We report on the influence of the chemical composition on the electronic properties of molybdenum oxynitrides thin films grown by reactive sputtering on Si (100) substrates at room temperature. The partial pressure of Ar was fixed at 90 %,…
Integration of organic semiconductors into flexible electronics requires that their optoelectronic properties remain stable under mechanical deformation. Among these, the optical band gap governs exciton generation and limits photovoltaic…
Oxygen vacancies, especially their distribution, are directly coupled to the electromagnetic properties of oxides and related emergent functionalities that have implication in device applications. Here using a homoepitaxial strontium…
We report on a photo-induced transient state of YBa2Cu2O6+x in which transport perpendicular to the Cu-O planes becomes highly coherent. This effect is achieved by excitation with mid-infrared optical pulses, tuned to the resonant frequency…
We report very large bandgap enhancement in SrTiO3 (STO) films (fabricated by pulsed laser deposition below 800 {\deg}C), which can be up to 20% greater than the bulk value, depending on the deposition temperature. The origin is…
We report bulk-quality n-type SrTiO3 (n-SrTiO3) thin films fabricated by pulsed laser deposition, with electron mobility as high as 6600 cm2 V-1 s-1 at 2 K and carrier density as low as 2.0 x 10^18cm-3 (~ 0.02 at. %), far exceeding previous…
The material BaBiO$_{3}$ is known for its insulating character. However, for thin films, in the ultra-thin limit, metallicity is expected because BaBiO$_{3}$ is suggested to return to its undistorted cubic phase where the oxygen octahedra…
In hydrogenated amorphous silicon oxide (a-SiO:H) films, incorporation of oxygen enhances optical gap due to a large number of St-O-Si bond formation, which lies deep into valence band states. An induction effect of this Si-O on other bonds…