相关论文: Dealloying of Platinum-Aluminum Thin Films Part II…

Pt-Al and Pt-Y-Al thin film electrodes on yttria-stabilised zirconia electrolytes were prepared by dealloying of co-sputtered Pt-Al or Pt-Y-Al films. The selective dissolution of Al from the Pt-alloy compound causes the formation of a…

(Ba0.6Sr0.4)(Zr0.3Ti0.7)O3 thin films were grown on IrO2 and Pt coated Si substrates. Film on Pt electrode showed large dielectric dispersion at lower frequency and on other hand film on IrO2 showed dielectric constant almost independent…

The structural interface properties of layered Pt/Ti/SiO2/Si electrodes have been investigated using high-resolution specular and diffuse x-ray reflectivity under grazing angles. Currently this multilayer system represents a technological…

A metal-oxide film can be used as a hydrogen-isotope permeation barrier in the fuel circulation system for nuclear fusion. We fabricated Er$_2$O$_3$ thin film on a type 316L stainless-steel substrate by using a metal-organic chemical vapor…

Platinum, Silver-Platinum embedded Zirconia (Pt/Ag-Pt ZrO2) thin films have been fabricated on silicon wafers and glass substrates using the plasma co-sputtering method. Zirconia thin films are of significant technological importance due to…

Applying focused ion beam (FIB) nanotomography and Rutherford backscattering spectroscopy (RBS) to dealloyed platinum-aluminum thin films an in-depth analysis of the dominating physical mechanisms of porosity formation during the dealloying…

Entropy stabilization has garnered significant attention as a new approach to designing novel materials. Much of the work in this area has focused on bulk ceramic processing, leaving entropy-stabilized thin films relatively underexplored.…

Pb(Zr0.52Ti0.48)O3 (PZT) thin films were in situ deposited by pulsed laser deposition (PLD) on Pt/Ti/SiO2/Si substrates using a template layer derived by sol-gel method. A 0.1-$\mu$m-thick PZT layer with (111) or (100)-preferred orientation…

The effect of platinum (Pt) bottom electrode texture on the tetragonality, dielectric, ferroelectric, and polarization switching response of pulsed laser deposited Ba0.8Sr0.2TiO3 (BST) thin films has been studied. The x-ray diffraction and…

Lead based relaxor ferroelectric thin films have been of technological importance due to excellent properties for several commercial applications. However subtleness and high cost of fabrication have plagued of these materials. In this work…

The Si based TiO2 thin films were prepared via the combination both of Sol-Gel and Spin-Coating method. The films were sintered at 850 degrees Celsius for half an hour, and the resulting films were characterized by X-ray diffraction (XRD)…

During the growth of metal thin films on dielectric substrates at a given deposition temperature T, the film's morphology is conditioned by the magnitude and asymmetry of up- and downhill diffusion. Any severe change of this mechanism leads…

The stability of a metal thin films on a dielectric substrate is conditioned by the magnitude of the interactive forces at the interface. In the case of a non-reactive interface and weak adhesion, the minimization of free surface energy…

We have studied the processing of piezoelectric thick films using electrophoretic deposition (EPD) for high-frequency ultrasound applications. Lead-zirconium-titanate (PZT) particles synthetized by solid states synthesis were dispersed in…

The effect of elastic strain on catalytic activity of platinum (Pt) towards oxygen reduction reaction (ORR) is investigated through de-alloyed Pt-Cu thin films; stress evolution in the de-alloyed layer and the mass of the Cu removed are…

Electrochemical water electrolysis, which produces clean energy carriers to mitigate carbon emissions, lacks suitable, low-cost electrodes for efficient oxygen evolution reaction (OER) in alkaline water splitting. To address this challenge,…

Devising effective platinum (Pt)-free nanomaterials for catalyzing oxygen reduction reaction (ORR) is desired, but some main drawbacks still exist for commercial implementation in fuel cell systems. Herein, we present the preparation of…

Platinum (Pt) and ruthenium (Ru), both members of the platinum-group metals (PGMs), are renowned for their exceptional resistance to corrosion, oxidation, and high temperatures, making them promising candidates for advanced high-temperature…

The electron dephasing processes in two-dimensional homogeneous and inhomogeneous indium tin oxide thin films have been investigated in a wide temperature range 0.3--90 K. We found that the small-energy-transfer electron-electron ($e$-$e$)…

The (secondary) electron emission from multilayered Al$_2$O$_3$/TiN membranes has been investigated with a hemispherical collector system in a scanning electron microscope for electrons with energies between 0.3 and 10 keV. These ultra-thin…