相关论文: High-reflectivity broadband distributed Bragg refl…

We present the realization and characterization of a 20 fold, fully lattice-matched epitaxial distributed Bragg reflector based on (Cd,Zn)Te and (Cd,Zn,Mg)Te layers. We also present a microcavity based on (Cd,Zn,Mg)Te containing a (Cd,Zn)Te…

Distributed Bragg reflectors (DBRs) are one of the basic photonic structures used to define microcavities for fundamental light-matter coupling studies, as well as to optimize performance of optoelectronic and photonic devices, e.g., lasers…

Distributed Bragg reflectors (DBRs) composed of an AlN/AlGaN superlattice were grown of Si (111) substrates. The first high-reflectance III-nitride DBR on Si was achieved by growing the DBR directly on the Si substrate to enhance the…

We demonstrate epitaxial lattice-matched Al$_{0.89}$Sc$_{0.11}$N/GaN ten and twenty period distributed Bragg reflectors (DBRs) grown on c-plane bulk n-type GaN substrates by plasma-enhanced molecular beam epitaxy (PA-MBE). Resulting from a…

Polymer compounds from titania-doped polyethylene are fabricated and their linear optical properties characterized by THz-TDS. We show that high concentration of dopants not only enhances the refractive index of the composite material, but…

The influence of a distributed Bragg reflector composed of ZnTe, MgTe, and MgSe superlattices on photoluminescence of self assembled CdTe quantum dots (QD) emitting in the yellow spectral range is investigated. In the case of QDs grown on a…

Antireflection coatings are an interesting challenge for multijunction solar cells due to their broadband spectrum absorption and the requirement of current matching of each subcell. A new design for multijunction solar cell antireflection…

Distributed bragg reflectors (DBRs) consisting of ZnO and amorphous silicon (a-Si) were prepared by magnetron sputtering method for selective light trapping. The quarter-wavelength ZnO/a-Si DBRs with only 6 periods exhibit a peak…

Highly reflective mirrors are indispensable components in a variety of state-of-the-art photonic devices. Typically used, bulky, multi-layered distributed Bragg (DBR) reflectors are limited to lattice-matched semiconductors or nonconductive…

We present an approach to the molecular-beam epitaxy of high-Q planar GaAs-based microcavities in which the AlGaAs high-index layers of the distributed Bragg reflectors (DBRs) are replaced by short-period GaAs/AlAs superlattices (digital…

Distributed Bragg reflectors (DBRs) composed of an AlN/GaN superlattice were demonstrated for the first time on Si (100) substrates. Single-crystal wurtzite superlattice structures were achieved on this cubic substrate by employing offcut…

We demonstrate a kind of grating coupler that generates high quality flat-top beam with a small beamwidth from photonic integrated circuits into free-space. The grating coupler is designed on a silicon-on-insulator wafer with a 220 nm-thick…

Nanowires (NWs) with a unique one-dimensional structure can monolithically integrate high-quality III-V semiconductors onto Si platform, which is highly promising to build lasers for Si photonics. However, the lasing from…

High-reflectance group III-nitride distributed Bragg reflectors (DBRs) were deposited by MOCVD on Si (111) substrates. A reflectance greater than 96% was demonstrated for the first time for an AlN/GaN DBR with a stop-band centered in the…

Polymeric materials are prized for their formability, low density, and functional versatility. However, the refractive indices of common polymers fall in a relatively narrow range between 1.4 and 1.6. Here, we demonstrate that loading…

Distributed Bragg Reflectors (DBR) are well-established photonic structures that are used in many photonic applications. However, most of the DBRs are based on different materials or require post-process etching which can hinder integration…

We report the fabrication of monolithically integrated 940 nm AlGaAs distributed Bragg reflectors (DBRs) on graded GaAsP/Si substrates. Low-density surface bumps and cross-hatch patterns were observed on the DBR surfaces. Cross-sectional…

We study Bragg scattering at 1D atomic lattices. Cold atoms are confined by optical dipole forces at the antinodes of a standing wave generated inside a laser-driven cavity. The atoms arrange themselves into an array of lens-shaped layers…

A new mechanism of Bragg reflection is identified, one that, remarkably, occurs in a uniform medium and relies on resonant tuning of the medium's parameters. Due to uniformity, reflection ensues over a broad wavelength range, much like a…

We present high-performance megahertz micromechanical oscillators based on freestanding epitaxial AlGaAs distributed Bragg reflectors. Compared with dielectric reflectors, the low mechanical loss of the monocrystalline heterostructure gives…