相关论文: A heat-and-pull rig for fiber taper fabrication
A novel design of large bandwidth, fabrication tolerant, CMOS-compatible compact tapers (15 um) have been proposed and experimentally demonstrated in silicon-on-insulator. The proposed taper along with linear grating couplers for spot-size…
We propose and demonstrate a novel laser cooling mechanism applicable to particles with narrow-linewidth optical transitions. By sweeping the frequency of counter-propagating laser beams in a sawtooth manner, we cause adiabatic transfer…
Optical fiber tapers are used to collect photoluminescence emission at ~1.5 um from photonic crystal cavities fabricated in erbium doped silicon nitride on silicon. Photoluminescence collection via fiber taper is enhanced 2.5 times relative…
Mathematical modelling is used to examine the unsteady problem of heating and pulling an axisymmetric cylindrical glass tube with an over-pressure applied within the tube to form tapers with a near uniform bore and small wall thickness at…
An ultracompact bi-sectional adiabatic tapered coupler, which is suitable for an adiabatic mode transformation between a common single mode SOI wire waveguide and a Si/III-V hybrid waveguide, are proposed for Si/III-V heterogeneous…
We developed an apparatus to couple a 50-micrometer diameter whispering-gallery silica microtoroidal resonator in a helium-4 cryostat using a straight optical tapered-fiber at 1550nm wavelength. On a top-loading probe specifically adapted…
We investigate the possibility of additively manufacturing fibrous sound absorbers using fused deposition modeling. Two methods for 3D printing fibers are proposed. The fiber bridging method involves extruding the filament between two…
The reported research work presents numerical studies validated by experimental results of a flat micro heat pipe with sintered copper wick structure. The objectives of this project are to produce and demonstrate the efficiency of the…
We present a high-yield method for fabricating concave micromirror templates in silica using feedback-controlled CO2 laser ablation with precise in situ positioning. Real-time monitoring of the white-light emission generated during ablation…
We describe a novel method for making microbottle-shaped lasers by using a CO$_2$ laser to melt Er:Yb glass onto silica microcapillaries or fibres. This is realised by the fact that the two glasses have different melting points. The CO$_2$…
We design and fabricate ultra-low-loss tapered optical fibers (TOFs) with minimal lengths. We first optimize variations of the torch scan length using the flame-brush method for fabricating TOFs with taper angles that satisfy the…
We demonstrate adiabatically tapered fibers terminating in sub-micron tips that are clad with a higher-index material for coupling to an on-chip waveguide. This cladding enables coupling to a high-index waveguide without losing light to the…
We present a novel method to fabricate low bend loss femtosecond-laser written waveguides that exploits the differential thermal stabilities of laser induced refractive index modifications. The technique consists of a two-step process; the…
Using optical tweezers and a haptic device, microspheres having diameters ranging from 3 to 4 um (floating in a fluid solution) are manipulated in order to form patterns of coupled optical microresonators by assembling the spheres via…
Additive manufacturing strives to combine any combination of materials into three dimensional functional structures and devices, ultimately opening up the possibility of 3D printed machines. It remains difficult to actuate such devices,…
Silica nanofibers fabricated by tapering optical fibers have attracted considerable interest as an ultimate platform for high-efficiency light-matter interactions. While previously demonstrated applications relied exclusively on the…
We describe a micro-fabrication method to create concave features with ultra-low surface roughness in silica, either on the end facets of optical fibers or on flat substrates. The machining uses a single focused CO2 laser pulse. Parameters…
A novel laser cooling mechanism was recently demonstrated using a narrow-linewidth optical transition. Counter-propagating laser beams are swept in frequency to cause adiabatic transfer between a ground state and excited state, and Doppler…
We present a near-field optical technique for second harmonic imaging using bare tapered optical fiber tip illuminated with femtosecond laser pulses. Enhancement of electric field at the tip of the fiber results in enhanced second harmonic…
We experimentally realize an optical fiber ring resonator that includes a tapered section with subwavelength-diameter waist. In this section, the guided light exhibits a significant evanescent field which allows for efficient interfacing…