相关论文: Crack path instabilities in DCDC experiments in th…
Mode-I fracture exhibits microbranching in the high velocity regime where the simple straight crack is unstable. For velocities below the instability, classic modeling using linear elasticity is valid. However, showing the existence of the…
We study the high-velocity regime mode-I fracture instability when small microbranches start to appear near the main crack, using large scale simulations. Some of the features of those microbranches have been reproduced qualitatively in…
We investigate the fragmentation process of solid materials with crystalline and amorphous phases using the discrete element method. Damage initiates inside spherical samples above the contact zone in a region where the circumferential…
Recent theoretical and computational progress has led to unprecedented understanding of symmetry-breaking instabilities in 2D dynamic fracture. At the heart of this progress resides the identification of two intrinsic, near crack tip length…
The extent to which time-dependent fracture criteria affect the dynamic behavior of fracture in a discrete structure is discussed in this work. The simplest case of a semi-infinite isotropic chain of oscillators has been studied. Two…
We study Mode I fracture in a viscoelastic lattice model with a nonlinear force law, with a focus on the velocity and linear stability of the steady-state propagating solution. This study is a continuation both of the study of the…
Mixed mode (I+III) loading induces segmented crack front \'echelon structures connected by steps. We study this instability in a highly deformable, strain-hardening material. We find that \'echelons develop beyond a finite, size-independent…
A short gas discharge layer sandwiched with a semiconductor layer between planar electrodes shows a variety of spatio-temporal patterns. The paper focusses on the spatially homogeneous spontaneous oscillations while a DC voltage is applied;…
A two-dimensional atomic mass spring system is investigated for critical fracture loads and its crack path geometry. We rigorously prove that, in the discrete-to-continuum limit, the minimal energy of a crystal under uniaxial tension leads…
Fracture growth in a material is strongly influenced by the presence of inhomogeneities, which deviate crack trajectories from rectilinearity and deeply affect failure. Increasing crack tortuosity is connected to enhancement of fracture…
A phase field model of a crack front propagating in a three dimensional brittle material is used to study the fractographic patterns induced by the branching instability. The numerical results of this model give rise to crack surfaces that…
Experiments of pure tensile fracture in brittle gels reveal a new dynamic oscillatory instability whose onset occurs at a critical velocity, Vc = 0.87 Cs, where Cs is the shear wave speed. Until Vc crack dynamics are well described by…
The problem of dynamic symmetric branching of an initial single brittle crack propagating at a given speed under plane loading conditions is studied within a continuum mechanics approach. Griffith's energy criterion and the principle of…
Adhesion hysteresis can be caused by elastic instabilities that are triggered by surface roughness or chemical heterogeneity. However, the role of these instabilities in adhesion hysteresis remains poorly understood because we lack…
In this study, the phase field model of crack propagation is used to study the dynamic branching instability in the case of inplane loading in two dimensions. Simulation results are in good agreement with theoretical predictions and…
Modeling the propagation of cracks at the microscopic level is fundamental to understand the effect of the microstructure on the fracture process. Nevertheless, microscopic propagation is often unstable and when using phase field fracture…
Dynamic Mode III interfacial fracture in a dissimilar square-cell lattice, composed of two contrasting mass-spring lattice half-planes joined at an interface, is considered. The fracture, driven by a remotely applied load, is assumed to…
The reliability of processes with moving elastic and isotropic material containing initial cracks is considered in terms of fracture. The material is modelled as a moving plate which is simply supported from two of its sides and subjected…
Fracture toughness is the material property characterizing resistance to failure. Predicting its value from the solid structure at the atomistic scale remains elusive, even in the simplest situations of brittle fracture. We report here…
This paper is concerned with the problem of a semi-infinite crack steadily propagating in an elastic solid with microstructures subject to antiplane loading applied on the crack surfaces. The loading is moving with the same constant…