相关论文: Improved operating voltage in InGaN-capped AlGaN-b…
With the decrease of the dimensions of electronic devices, the role played by electrical contacts is ever increasing, eventually coming to dominate the overall device volume and total resistance. This is especially problematic for…
Several pn junctions were constructed from mechanically exfoliated ultrawide bandgap (UWBG) beta-phase gallium oxide (\b{eta}-Ga2O3) and p-type gallium nitride (GaN). The mechanical exfoliation process, which is described in detail, is…
Two-dimensional (2D) semiconductors are promising for low-power complementary metal oxide semiconductor (CMOS) electronics, which require ultrathin n- and p-type transistor channels. Among 2D semiconductors, WS2 is expected to have good…
InGaN-based light emitting diodes (LEDs) are known to suffer from low electron and hole wavefunction overlap due to high piezoelectric field. Staggered InGaN quantum wells (QWs) have been proposed to increase the wavefunction overlap and…
III-Nitride light emitting diodes (LEDs) are widely used in a range of high efficiency lighting and display applications, which have enabled significant energy savings in the last decade. Despite the wide application of GaN LEDs, transport…
Ultra-violet emitters have several applications in the areas of sensing, water purification, and data storage. While the III-Nitride semiconductor system has the band gap region necessary for ultraviolet emission, achieving efficient…
We report a dramatic current reduction, or a resistance increase, by a few orders of magnitude of two common-anode Au/Ti/pGaN Schottky junctions annealed within a certain annealing condition window (600 - 700 oC, 1 - 4 min). Results from…
Silicon-based micro-devices are considered promising candidates for consolidating several terahertz technologies into a common and practical platform. The practicality stems from the relatively low loss, device compactness, ease of…
In this paper, we aim to understand the apparent characteristics of IQE and I-V curve in AlGaInP and InGaN LED devices. For the analysis, we separate the current into radiative current and non-radiative current component by using the…
High contact resistance remains a central obstacle to the integration of two-dimensional (2D) semiconductors in electronic devices. Recent advances have demonstrated that contact performance can be dramatically improved through interface…
Superluminescent diodes are promising devices for applications in which low coherence, high efficiency, small foot-print and good optoelectronic integration are required. Blue emitting superluminescent diodes with good performances and easy…
Integrated semiconductor mode-locked lasers have shown promise in many applications and are readily fabricated using generic InP photonic integration platforms. However, the passive waveguides offered in such platforms have relatively high…
We report on unique features of ultra-thin GaN/AlN quantum wells and demonstrate a new field emission device for human-safe disinfection with an external quantum efficiency of 18% and superior reliability, as compared to far-UVC LEDs. We…
We have investigated metallic break junctions of the heavy-fermion compound UPd2Al3 at low temperatures between 0.1K and 9K and in magnetic fields up to 8T. Both the current-voltage I(V) characteristics and the dV/dI (V) spectra clearly…
While advancing a physics-based comprehensive photodetector-simulation model, we propose a novel device design of the mid-wavelength infrared nBn photodetectors by exploiting the inherit flexibility of the $InAs_{1-x}Sb_{x}$ ternary alloy…
Light-matter interactions in the deep ultraviolet (DUV) wavelength region exhibits a variety of optical effects such as luminescence, photoisomerization, and polymerization in many materials. Despite the rich photochemistry and high spatial…
Red InGaN-based light-emitting diodes (LEDs) exhibit lower internal quantum efficiencies (IQEs) than violet, blue, and green InGaN LEDs due to a reduction in radiative recombination rates relative to non-radiative recombination rates as the…
We report on the fabrication and electrical characterization of field-effect devices based on wire-shaped InP crystals grown from Au catalyst particles by a vapor-liquid-solid process. Our InP wires are n-type doped with diameters in the…
The magnetic sensitivity of Hall-effect sensors made of InAlN/GaN and AlGaN/GaN heterostructures was measured between room temperature and 576{\deg}C. Both devices showed decreasing voltage-scaled magnetic sensitivity at high temperature,…
III-V semiconductor-based photoelectrochemical (PEC) devices show the highest solar-to-electricity or solar-to-fuel conversion efficiencies. GaInP is a relevant top photoabsorber layer or a charge-selective contact in PEC for integrated and…