相关论文: Strain effects on the wear rate of severely deform…
Experiments test the dependence of shearing stress on the first two gradients of shear strain. The tests were conducted by direct numerical simulation using the Discrete Element Method (DEM) on a large two-dimensional (2D) assembly of…
Drop impact causes severe surface erosion, dictating many important natural, environmental and engineering processes and calling for substantial prevention and preservation efforts. Nevertheless, despite extensive studies on the kinematic…
Surface roughness affects many properties of colloids, from depletion [1] and capillary interactions [2], to their dispersibility [3] and use as emulsion stabilizers [4]. It also impacts particle-particle frictional contacts, which have…
The optical properties of two-dimensional materials can be effectively tuned by strain induced from a deformable substrate. In the present work we combine first-principles calculations based on density functional theory and the effective…
Predicting the behaviour of complex systems is one of the main goals of science. An important example is plastic deformation of micron-scale crystals, a process mediated by collective dynamics of dislocations, manifested as broadly…
The mechanical behavior of nanotwinned Cu was studied through indentation creep and constant strain rate indentation tests from 25 $^\circ$C to 200 $^\circ$C. The results showed an enhanced strain rate sensitivity of nanotwinned Cu with…
A crystal plasticity theory was developed for use in simulations of dynamic loading at high pressures and strain rates. At pressures of the order of the bulk modulus, compressions o(100%) may be induced. At strain rates o(10^9)/s or higher,…
To prolong lifetime and reduce energy consumption, a thorough understanding of abrasive wear is essential. The potentially crucial influence of surface topography intricacies on tribological behavior have been obscured, since roughness and…
The thermal effects of plastic and frictional heat generation and elevated temperature were examined along with the role of adhesion in the context of galling wear, using a representative crystal plasticity, normally loaded, sliding surface…
Zirconium alloys are used in the nuclear industry as structural materials, and can be subject to high strain rate loading conditions during forming and in the case of a reactor accident. In this context, the relationship between strain rate…
In this work hydrogen diffusion towards the fracture process zone is examined accounting for local hardening due to geometrically necessary dislocations (GNDs) by means of strain gradient plasticity (SGP). Finite element computations are…
Recent computational and theoretical studies have shown that the deformation of colloidal suspensions under a steady shear is highly heterogeneous at the particle level and demonstrate a critical influence on the macroscopic deformation…
We investigate a minimal model of the plastic deformation of amorphous materials. The material elements are assumed to exhibit ideally plastic behavior (J2 plasticity). Structural disorder is considered in terms of random variations of the…
Germanium is a strong candidate as a laser source for silicon photonics. It is widely accepted that the band structure of germanium can be altered by tensile strain so as to reduce the energy difference between its direct and indirect band…
The mechanical response, serviceability, and load bearing capacity of materials and structural components can be adversely affected due to external stimuli, which include exposure to a corrosive chemical species, high temperatures,…
A decrease of fracture toughness of irradiated materials is usually observed, as reported for austenitic stainless steels in Light Water Reactors (LWRs) or copper alloys for fusion applications. For a wide range of applications (e.g.…
Strengthening by grain refinement via the Hall-Petch mechanism and softening by nanograin formation via the inverse Hall-Petch mechanism have been the subject of argument for decades, particularly for ultrafine-grained materials. In this…
The research aims to analyze the impact that severe plastic deformation arising during Rotary Swaging has on mechanical properties and corrosion resistance of a near-a-titanium alloy Ti-2.5Al-2.6Zr (Russian industrial name PT7M). The nature…
Confined geometries offer useful and experimentally amenable mechanical testing arrangements in which to study the molecular and micro-structural processes which govern plastic yield in stress environments dominated by hydrostatic pressure…
An analysis is presented of the applicability of the Kolsky technique for studying the high-rate deformation processes of structural materials under compression. Errors in the method caused by inertia and friction are estimated.…