相关论文: Strain effects on the wear rate of severely deform…
In this work we explore the rheology of very concentrated (0.55<$\Phi$<0.67) suspensions of carbonyl iron (CI) particles coated by a small polymer. A strong DST is observed in a large range of volume fraction presenting some specificities…
The effect of finite temperature $T$ and finite strain rate $\dot\gamma$ on the statistical physics of plastic deformations in amorphous solids made of $N$ particles is investigated. We recognize three regimes of temperature where the…
Digital image correlation of laser-ablated platinum nanoparticles on the surface of a polycrystalline metal (nickel-based superalloy Rene 88DT) was used to obtain the local strain behavior from an in situ scanning electron microscope…
Near-beta titanium alloys have shown low Young's modulus and good strength, making them excellent implant candidates. However, their processing using thermomechanical routes in single phase beta region results in heterogeneous…
The plastic deformation processes that occur in a tensily deformed High Density Polyethylene specimen were studied from full-field strain and strain rate measurements obtained by 3D DIC (Digital Image Correlation).The tensile tests were…
We present a comprehensive investigation of the electrical and thermal conductivity of iron under high pressures at ambient temperature, employing the real-time formulation of time-dependent density functional theory (RT-TDDFT).…
Residual stress and plastic strain in additive manufactured materials can exhibit significant microscopic variation at the powder scale, profoundly influencing the overall properties of printed components. This variation depends on…
Straintronics involves the manipulation and regulation of the electronic characteristics of 2D materials through the use of macro- and nano-scale strain engineering. In this study, we utilized an atomic force microscope (AFM) coupled with…
We investigate the effect of short chains on slip of highly entangled polystyrenes (PS) during thin film dewetting from non-wetting fluorinated surfaces. Binary and ternary mixtures were prepared from monodisperse PS with weight average…
Metals deformed at high strain rates can exhibit failure through formation of shear bands, a phenomenon often attributed to Hadamard instability and localization of the strain into an emerging coherent structure. We verify formation of…
The lifetime of moving metallic components is often limited by accelerated oxidation. Yet, the mechanisms and pathways for oxidation during tribological loading are not well understood. Using copper as a model system, tribologically-induced…
We identify three distinct shearing modes for simple shear deformations of transversely isotropic soft tissue which allow for both positive and negative Poynting effects (that is, they require compressive and tensile lateral normal…
The impact of severe plastic deformation by high-pressure torsion on the relaxation of the glassy and supercooled liquid states of Pd$_{40}$Ni$_{40}$P$_{20}$ was investigated using a combination of differential scanning calorimetry,…
Understanding deformation in polycrystalline metals is critical to use them in high-value high-risk applications. We present in-situ characterisation of plastic deformation of zirconium, a hexagonal closed packed (HCP), metal. Analysis of…
The high-pressure growth technique generally plays an important role in the improvement of the sample quality and the enhancement of various physical and magnetic properties of materials. The high gas pressure technique provides a large…
Tungsten carbide cobalt hardmetals are commonly used as cutting tools subject to high operation temperature and pressures, where the mechanical performance of the tungsten carbide phase affects the wear and lifetime of the material. In this…
In the Cu Cr system, the formation of supersaturated solid solutions can be obtained by severe plastic deformation. Energy dispersive synchrotron diffraction measurements on as deformed Cu Cr samples as a function of the applied strain…
The plastic deformation mechanisms of tungsten carbide at room and elevated temperatures influence the wear and fracture properties of WC-Co hardmetal composite materials. The relationship between residual defect structures, including…
The contact line of a liquid drop on a solid exerts a nanometrically sharp surface traction. This provides an unprecedented tool to study highly localised and dynamic surface deformations of soft polymer networks. One of the outstanding…
We theoretically consider the effect of strain on the spin dynamics of a single heavy-hole (HH) confined to a self-assembled quantum dot and interacting with the surrounding nuclei via hyperfine interaction. Confinement and strain hybridize…