相关论文: Strain effects on the wear rate of severely deform…
A micromechanical model at the microscale within a crystal plasticity self-consistent model, is used to analyse loading histories in Type 316H stainless steel, common to structural components in high-temperature power plants. The study…
Metal thin films on soft polymers provide a unique opportunity for resistance-based strain sensors. A mechanical mismatch between the conductive film and the flexible substrate causes cracks to open and close, changing the electrical…
We formulate a generic concept model for the deformation of a locally disordered, macroscopically homogeneous material which undergoes irreversible strain softening during plastic deformation. We investigate the influence of the degree of…
Spin Hall effects have surged as promising phenomena for spin logics operations without ferromagnets. However, the magnitude of the detected electric signals at room temperature in metallic systems has been so far underwhelming. Here, we…
As a wide bandgap semiconductor, diamond holds both excellent electrical and thermal properties, making it highly promising in the electrical industry. However, its hole mobility is relatively low and dramatically decreases with increasing…
We investigate the strain-rate-dependent mechanical behavior and deformation mechanisms of a refractory high entropy alloy, Ti29Zr24Nb23Hf24 (at.%), with a single-phase body-centered cubic (BCC) structure. High-temperature compression tests…
We conduct dislocation dynamics (DD) simulations of Fe periodic single crystals under tensile load at several high strain rates and temperatures. The simulations are enabled by the recent development of temperature-dependent dislocation…
Surface stress, also known as surface tension, is a fundamental material property of any interface. However, measurements of solid surface stress in traditional engineering materials, such as metals and oxides, have proven to be very…
Fatigue simulation requires accurate modeling of unloading and reloading. However, classical ductile damage models treat deformations after complete failure as irrecoverable -- which leads to unphysical behavior during unloading. This…
The creep behaviour and microstructural evolution of a Sn-3Ag-0.5Cu wt.% sample with a columnar microstructure have been investigated through in-situ creep testing under constant stress of 30 MPa at 298 K. This is important, as 298 K is…
In this work, sintered polycrystalline cubic boron nitride (cBN) compacts, with titanium carbonitride (TiC0.7N0.3) and titanium nitride (TiN), respectively, as binders, were prepared at temperature of 1450{\deg}C and pressure of 5.5 GPa…
Laser hardening of metals occurs under the influence of a shock wave, which changes the distribution and density of one-dimensional defects - dislocations. There is a relationship between the density of dislocations, the grain size and the…
Study of the plastic flow and strain-induced phase transformations (PTs) under high pressure with diamond anvils is important for material and geophysics. We introduce rough diamond anvils and apply them to Zr, which drastically change the…
Strain engineering can effectively tune the electronic, topological and piezoelectric properties of materials. In this work, the small strain (-4\% to 4\%) effects on piezoelectric properties of $\alpha$-AsP monolayer are studied by density…
Brittle-ductile transition (BDT) is an important characteristic of amorphous (and semicrystalline) polymers. For a given strain rate, at temperatures above BDT, the polymers exhibit strain softening followed by yield and strain hardening,…
In large area micro hot embossing, the process temperature plays a critical role to both the local fidelity of microstructure formation and global uniformity. The significance of low temperature hot embossing is to improve global flatness…
For polymer nanocomposites, disordered microstructural nature makes processing control and tailoring properties to desired values a challenge. Understanding process-structure-property relation can provide guidelines for process and…
Dislocation-density-based crystal plasticity (CP) models are introduced to account for the microstructural changes throughout the deformation process, enabling more quantitative predictions of the deformation process compared to slip-system…
The successful commercialization of flexible spintronic devices requires a complete understanding of the impact of external strain on the structural, electronic, and magnetic properties of a system. The impact of bending-induced strain on…
We investigate dilation-induced surface deformations in a Discontinuous Shear Thickening (DST) suspension to determine the relationship between dilation and stresses in DST. Video is taken at two observation points on the surface of the…