相关论文: Strain effects on the wear rate of severely deform…
Finite element analysis of stress about a blunt crack tip, emphasizing finite strain and phenomenological and mechanism-based strain gradient plasticity (SGP) formulations, is integrated with electrochemical assessment of occluded-crack tip…
Nickel carbon nanotube composites with varying amounts of carbon nanotubes are deformed by high pressure torsion at different deformation temperatures to high strains, where no further refinement of the Nickel matrix microstructure is…
A clear understanding of the dynamic behavior of metals is critical for developing superior structural materials as well as for improving material processing techniques such as cold spray and shot peening. Using a high velocity (from 120…
Considering the sensitivity of both fatigue strength and corrosion rate to the surface characteristics, apposite surface treatments could address the related challenges for biodegradable magnesium-based materials. Herein, we treated the…
A yield surface of a material is a set of critical stress conditions beyond which macroscopic plastic deformation begins. For crystalline solids, plastic deformation occurs through the motion of dislocations, which can be captured by…
Hyperelastic material characterization is crucial for understanding the behavior of soft materials -- such as tissues, rubbers, hydrogels, and polymers -- under quasi-static loading before failure. Traditional methods typically rely on…
Dendritic microstructures are frequently observed in as-solidified refractory high-entropy alloys (RHEAs), and their homogenization typically requires a long-term heat treatment at extremely high temperatures. High-pressure torsion (HPT)…
High-entropy alloys (HEAs) have emerged as favorable choices for different applications, including superconductors. The present work examines the impact of nanostructuring via high-pressure torsion (HPT) on the superconducting properties of…
We report a novel experimental methodology for in situ measurement of electrical resistivity changes in T2 copper during dynamic compression utilizing a split Hopkinson pressure bar. The effects of adiabatic temperature rise and specimen…
The combined strengthening effects of grain refinement and high precipitated volume fraction (~6at.%) on the mechanical properties of FeSiTi alloy subjected to SPD processing prior to aging treatment were investigated by atom probe…
Metals exhibit an upturn in strength at strain rates of approximately 1000 s-1 - 3000 s-1, governed by rapid dislocation multiplication, interactions and storage. This phenomenon is strongly influenced by the initial dislocation density…
Large-scale molecular dynamics simulations of shear deformation under constant pressures of amorphous silicon, PT from low-density-amorphous (LDA) to high-density-amorphous (HDA) Si, and formation of shear bands (SBs) are performed using…
A central focus in high strain rate research is understanding the dynamic behavior of materials at strain rates where a strength upturn is observed. While strength upturns at strain rates of $10^3$ to $10^4~\mathrm{s}^{-1}$ have been widely…
The role of plastic deformation in the high-pressure compaction of granular material is investigated using bonded particle model simulations. Grains are discretized into a set of computational particles connected by pairwise bonds. Bonds…
A filamentary composite elaborated by cold drawing was processed by High Pressure Torsion (HPT). The nanostructure resulting from this severe plastic deformation (SPD) was investigated thanks to scanning electron microscopy, transmission…
The mechanical behavior of antigorite strongly influences the strength and deformation of the subduction interface. Although there is microstructural evidence elucidating the nature of brittle deformation at low pressures, there is often…
The ability to measure small deformations or strains is useful for understanding many aspects of materials. Here, a new analysis of speckle diffraction peaks is presented in which the systematic shifts of the speckles are analyzed allowing…
Controlling optical and tribological properties of metal surfaces, like color and wear rate, without altering their chemical composition is a highly desirable process across numerous fields of science and industry. It represents a…
(Abridged, full abstract available in the text) The main goal of the study presented in this thesis was to perform in-situ investigations on deformation structures in plastically deformed polycrystalline copper at low degrees (<5%) of…
The dislocation microstructure developing during plastic deformation strongly influences the stress-strain properties of crystalline materials. The novel method of high resolution electron backscatter diffraction (HR-EBSD) offers a new…