相关论文: Quality control of the CFRP mirror manufacturing p…
The recent years have given rise to a large number of techniques for "looking around corners", i.e., for reconstructing occluded objects from time-resolved measurements of indirect light reflections off a wall. While the direct view of…
Neural Radiance Fields (NeRF) have demonstrated exceptional capabilities in reconstructing complex scenes with high fidelity. However, NeRF's view dependency can only handle low-frequency reflections. It falls short when handling complex…
When an oscillating line source is placed in front of a special mirror consisting of an array of flat uniformly spaced ferrite rods, half of the image disappeared at some frequency. We believe that this comes from the coupling to photonic…
The X-ray diffractometer in the laboratory is a crucial instrument for analyzing materials in science. It can be used on almost any crystal material, and if the machine parameters are appropriately controlled, it can offer a lot of…
The goal of this thesis was to develop a procedure to optimize the mirror suppression, which reduces the dynamic range of the Fast Fourier Transform spectrometers (FFTS), and implement this procedure in the Field Programmable Gate Array…
Precision and Recall are two prominent metrics of generative performance, which were proposed to separately measure the fidelity and diversity of generative models. Given their central role in comparing and improving generative models,…
The aberrations induced by the sample and/or by the sample holder limit the resolution of optical microscopes. Wavefront correction can be achieved using a deformable mirror with wavefront sensorless optimization algorithms but, despite the…
Focal ratio degradation measurements of optical fibers for the PMAS integral field instrument have been performed using the Photometric Testbench of the Potsdam Astrophysical Institute (AIP). An effort has been made to obtain sufficiently…
This paper presents the first-principle design approach for X-ray active optics, using the simulation-modulation cycle in place of the measurement-modulation feedback loops used in traditional active optics. Hence, the new active optics…
The imaging sharpness of an X-ray telescope is chiefly determined by the optical quality of its focusing optics, which in turn mostly depends on the shape accuracy and the surface finishing of the grazing-incidence X-ray mirrors that…
Any material in thermal equilibrium exhibits fundamental thermodynamic fluctuations of its mechanical and optical properties. Such thermodynamic fluctuations of length, elastic constants, and refractive index of amorphous materials -- like…
Microscope objectives achieve near diffraction-limited performance only when used under the conditions they are designed for. In non-standard geometries, such as thick cover slips or curved surfaces, severe aberrations arise, inevitably…
We present two complementary algorithms suitable for using focal-plane measurements to control a wavefront corrector with an extremely high spatial resolution. The algorithms use linear approximations to iteratively minimize the aberrations…
context: The combination of image restoration and a Fabry-P\'{e}rot interferometer (FPI) based instrument in solar observations results in specific calibration issues. FPIs generally show variations over the field-of-view, while in the…
Q1: Why deploy N wavefront sensors on a three mirror anastigmat (TMA) and not N + 1? Q2: Why measure M Zernike coefficients and not M + 1? Q3: Why control L rigid body degrees of freedom (total) on the secondary and tertiary and not L + 1?…
Fractal dimension (D) is an effective parameter to represent the irregularity and fragmental property of a self-affine surface, which is common in physical vapor deposited thin films. D could be evaluated through the scaling performance of…
Traditional glass-based optics are typically optimized for narrow spectral bands, such as the visible (400-700nm) or shortwave infrared (1000-1800nm). While the emergence of VIS-SWIR sensors (400-1700nm) offers transformative potential,…
The defining property of an artificial physical self-replicating system, such as a self-replicating robot, is that it has the ability to make copies of itself from basic parts. Three questions that immediately arises in the study of such…
Recent advances in neural rendering have introduced numerous 3D scene representations. Although standard computer vision metrics evaluate the visual quality of generated images, they often overlook the fidelity of surface geometry. This…
Machine learning models deployed in real-world applications are often evaluated with precision-based metrics such as F1-score or AUC-PR (Area Under the Curve of Precision Recall). Heavily dependent on the class prior, such metrics make it…