相关论文: Structure and morphology of low mechanical loss Ti…
Vanadium dioxide with metal-to-insulator transition (MIT) that is triggered by heat, current or light is a promising material for modern active THz/mid-IR metasurfaces and all-optical big data processing systems. Multilayer VO2-based active…
Brownian thermal noise is a limiting factor for the sensitivity of many high precision metrology applications, among other gravitational-wave detectors. The origin of Brownian noise can be traced down to internal friction in the amorphous…
The efforts in the optimization of the physical and chemical properties related to the photocatalytic efficiency of TiO2 nanoparticles relies mainly on defect engineering strategies, been the structural and the doping the most common ones.…
The optical properties of thermally annealed TiO2 samples depend on their preparation process, and the TiO2 thin films usually exist in the form of anatase or rutile or the mixture of the two phases. The electronic structures and optical…
Tantalum oxides (Ta$_2$O$_5$) are characterised by attractive physical and chemical properties, such as high dielectric constants and anti-reflection behaviour. Recently, Ta$_2$O$_5$ nanoparticles have also been proposed as possible…
Atomically-abrupt interfaces in transition metal oxide (TMO) heterostructures could host a variety of exotic condensed matter phases that may not be found in the bulk materials at equilibrium. A critical step in the development of such…
SrTiO$_{3}$ is one of the most popular insulating single-crystal substrates for various complex-oxide thin film growths, because of its good lattice match with many complex oxide films. Here, we show that a common thin film processing…
X-ray photoelectron spectroscopy (XPS) and resonant x-ray emission spectroscopy (RXES) measurements of pellet and thin film forms of TiO$_2$ with implanted Fe ions are presented and discussed. The findings indicate that Fe-implantation in a…
In the present work, HfO2 thin film (100nm) has been deposited by sputtering technique and annealed at various temperatures ranging from 400 to 1000\degree (in step of 200 \degree) in O2 ambient for 10 min. The samples have been…
Topological insulators are immensely investigated for their surface states related properties as these materials can be used for various spintronics, quantum computing, and optoelectronics applications. In this perspective, different…
Insulator to metal (IMT) transition (T$_t$ $\sim$ 341 K) in the VO2 accompanies transition from an infrared (IR) transparent to IR opaque phase. Tailoring of the IMT and associated IR switching behavior can offer potential thermochromic…
Amorphous titanium dioxide TiO2 (a-TiO2) has been widely studied, particularly as a protective coating layer on semiconductors to prevent corrosion and promote electron-hole conduction in photoelectrochemical reactions. The stability and…
The structural interface properties of layered Pt/Ti/SiO2/Si electrodes have been investigated using high-resolution specular and diffuse x-ray reflectivity under grazing angles. Currently this multilayer system represents a technological…
Vanadium Dioxide (VO2) is a strongly correlated material, which exhibits insulator to metal transition at ~68 C along with large resistivity and infrared optical reflectance modulation. In this work, we use atmospheric pressure thermal…
Hybrid systems consisting of metal-fullerene composites exhibit intriguing properties but often suffer from thermal instability. With proper control, such instability can be harnessed to enable the formation of sophisticated nanostructures…
We have made a detailed temperature-dependent photoemission study of VO_2/TiO_2(001) thin films, which show a metal-insulator transition at \sim 300 K. Clean surfaces were obtained by annealing the films in an oxygen atmosphere. Spectral…
Ruthenium dioxide (RuO$_2$) thin films were synthesized by Chemical Solution Deposition (CSD) on silicon substrates using only water and acetic acid as solvents. The microstructure, phase-purity, electrical and optical properties as well as…
Al2O3 thin films have been deposited at substrate temperatures between 500{\deg}C to 600{\deg}C by reactive magnetron sputtering using an additional arbitrary substrate bias to tailor the energy distribution of the incident ions. The films…
We have measured photoemission spectra of two kinds of TiO$_2$-capped VO$_2$ thin films, namely, that with rutile-type TiO$_2$ (r-TiO$_2$/VO$_2$) and that with amorphous TiO$_2$ (a-TiO$_2$/VO$_2$) capping layers. Below the Metal-insulator…
Two essential ingredients for the quantum anomalous Hall (QAH) effect, i.e. topological and magnetic orders, can be combined by doping magnetic ions into a topological insulator (TI) film. Through this approach, the QAH effect has been…