相关论文: Creep failure of honeycombs made by rapid prototyp…
Tungsten is the main candidate material for plasma-facing armour components in future fusion reactors. Bombardment with energetic fusion neutrons causes collision cascade damage and defect formation. Interaction of defects with helium,…
Cryogenic fuels, such as liquid hydrogen and liquid natural gas, emerge as versatile and sustainable energy carriers that are revolutionising various industries including aerospace, automotive, marine, and power generation. Thermoplastic…
Conventional drop-weight techniques were modified to accommodate low-amplitude force transducer signals from low-strength, cold isostatically pressed 'heavy' composites of polytetrafluoroethylene, aluminum and tungsten. The failure…
Incremental stiffness characterizes the variation of a material's force response to a small deformation change. Typically materials have an incremental stiffness that is fixed and positive, but recent technologies, such as super-lenses, low…
We study the crushing strength of brittle materials whose internal structure (e.g., mineral particles or graining) presents a layered arrangement reminiscent of sedimentary and metamorphic rocks. Taking a discrete-element approach, we probe…
With the aim of understanding failure modes in the peeling of silicone-based adhesive joints and, in particular, the occurrence of adhesive or cohesive failure, an experimental campaign has been conducted by considering plastic substrates…
We report Monte Carlo studies of a two-dimensional soft colloidal crystal confined in a strip geometry by parallel walls. The wall-particle interaction has corrugations along the length of the strip. Compressing the crystal by decreasing…
We investigate the propagation of a slip front in a visco-elastic body on a rigid substrate. The body is one-dimensional, and the loading stress is applied at one end. By employing a local friction law that has a quadratic form of the slip…
The thermodynamic and kinetics of the one dimensional lattice gas with repulsive interaction is investigated using transfer matrix technique and Monte Carlo simulations. This simple model is shown to exhibit waterlike anomalies in density,…
We study the existence of distinct failure regimes in a model for fracture in fibrous materials. We simulate a bundle of parallel fibers under uniaxial static load and observe two different failure regimes: a catastrophic and a slowly…
A constitutive model based on the combination of damage mechanics and plasticity is developed to analyse the failure of concrete structures. The aim is to obtain a model, which describes the important characteristics of the failure process…
We use driven Monte Carlo dynamics to study the resistive behavior of superconducting Josephson junction arrays on a honeycomb lattice in a magnetic field corresponding to $f$ flux quantum per plaquette. While for $f=1/3$ the onset of zero…
The effect of stress-triaxiality on growth of a void in a three dimensional single-crystal face-centered-cubic (FCC) lattice has been studied. Molecular dynamics (MD) simulations using an embedded-atom (EAM) potential for copper have been…
The invasion of air into porous systems in drying processes is often localized in soft materials, such as colloidal suspensions and granular pastes, and it typically develops in the form of cracks before ordinary drying begins. To…
The properties of a particle diffusing on a one-dimensional lattice where at each site a random barrier and a random trap act simultaneously on the particle are investigated by numerical and analytical techniques. The combined effect of…
We study the creep behavior of a disordered brittle material (concrete) under successive loading steps, using acoustic emission and ultrasonic sensing to track internal damage. The primary creep rate is observed to follow a (Omori-type)…
The research reveals the existence of a constant characteristic time of preparatory micro-structural processes before the onset of macro-failure at various high loading rates of brittle and quasi-brittle materials. The presence of this…
Crystal-level strain rate sensitivity and temperature sensitivity are investigated in Zircaloy-4 using combined of bending creep test, digital image correlation, electron backscatter detection and thermo-mechanical tensile tests with…
We study the percolation and jamming of rods ($k$-mers) on a square lattice that contains defects. The point defects are placed randomly and uniformly on the substrate before deposition of the rods. The general case of unequal probabilities…
The relevant parameters at the microstructure scale that govern the macroscopic toughness of disordered brittle materials are investigated theoretically. We focus on planar crack propagation and describe the front evolution as the…