相关论文: Effect of Low-Frequency Signal On Nanoscale Memris…
In this paper, we report the effect of write voltage and frequency on memristor based Resistive Random Access Memory (RRAM). The above said parameters have been investigated on the linear drift model of memristor. With a variation of write…
A new mechanism of low frequency (1/f-like) noise generation is described and analyzed. It is attributed to higher frequency asymmetric resonance modes, which are stimulated by a random factor, e.g. due to thermal excitation.…
Memristors have been at the forefront of nanoelectronics research for the last decade, offering a valuable component to reconfigurable computing. Their attributes have been studied extensively along with applications that leverage their…
Low-frequency 1/f voltage noise has been employed to probe stochastic charge dynamics in AlO$_{x}$-based non-volatile resistive memory devices exhibiting both resistive switching (RS) and magneto-resistive (MR) effects. A 1/f$^{\gamma}$…
Ubiquitous low frequency 1/f noise can be a limiting factor in the performance and application of nanoscale devices. Here, we quantitatively investigate low frequency electronic noise in single-layer transition metal dichalcogenide MoS2…
The dynamics of nanomechanical resonators driven by both low- and high-frequency signals is studied. Considering, as an example, resonators made of a doubly-clamped beam with magnetomotive driving, it is shown that three-frequency…
We observe magnetic effects in ultra-high quality factor crystalline quartz Bulk Acoustic Wave resonators at milli-Kelvin temperature. The study reveals existence of hysteresis loops, jumps and memory effects of acoustical resonance…
Nanomechanical resonators promise diverse applications ranging from mass spectrometry to quantum information processing, requiring long phonon lifetimes and frequency stability. Although two-level system (TLS) defects govern dissipation at…
Understanding and minimizing the sources of frequency noise in nanomechanical resonators is crucial for many sensing applications. In this work, we report an ultracoherent perimeter-mode nanomechanical resonator co-integrated with an…
Diffusive memristors continue to receive tremendous interest due to their ability to emulate biological neurons and thus aid the development of bio-inspired computation technology. A major issue with the diffusive memristor is the inability…
We report that low frequency (up to 200 kHz) noise spectra of magnetic tunnel junctions with areas ~10^{-10}cm^2$ at 10 Kelvin deviate significantly from the typical 1/f behavior found in large area junctions at room temperature. In most…
A memristor is often identified by showing its distinctive pinched hysteresis curve and testing for the effect of frequency. The hysteresis size should relate to frequency and shrink to zero as the frequency approaches infinity. Although…
The low-frequency noise (LF-noise) of deep submicron MOSFETs is experimentally studied with special emphasis on yield relevant parameter scattering. A novel modeling approach is developed which includes detailed consideration of statistical…
The effect of a high-frequency signal on the FitzHugh-Nagumo excitable model is analyzed. We show that the firing rate is diminished as the ratio of the high-frequency amplitude to its frequency is increased. Moreover, it is demonstrated…
Memory effects are ubiquitous in nature and are particularly relevant at the nanoscale where the dynamical properties of electrons and ions strongly depend on the history of the system, at least within certain time scales. We review here…
We investigated the ferromagnetic resonance signals in a polycrystalline permalloy thin strip under in-plane low static magnetic field. A series of DC voltages, which contain ferromagnetic resonance or spin wave resonance signals, were…
Mechanical resonators are widely used as precision clocks and sensitive detectors that rely on the stability of their eigenfrequencies. The phase noise is determined by different factors ranging from thermal noise and frequency noise of the…
A bifurcating system subject to multiplicative noise can display on-off intermittency. Using a canonical example, we investigate the extreme sensitivity of the intermittent behavior to the nature of the noise. Through a perturbative…
Frequency stability is key to performance of nanoresonators. This stability is thought to reach a limit with the resonator's ability to resolve thermally-induced vibrations. Although measurements and predictions of resonator stability…
Piezoresistive strain gauges allow for electronic readout of mechanical deformations with high fidelity. As piezoresistive strain gauges are aggressively being scaled down for applications in nanotechnology, it has become critical to…