相关论文: Extraction of Schottky barrier height insensitive …

Schottky barrier inhomogeneities are expected at the metal/TMDC interface and this can impact device performance. However, it is difficult to account for the distribution of interface inhomogeneity as most techniques average over the…

The forward and reverse current-voltage characteristics of the Mo/n-Si Schottky barrier structures have been studied experimentally in the temperature range 130-330 K. It is found that Shottky barrier height increases and time ideality…

In this paper, the electrical behavior of tungsten carbide (WC) Schottky barrier on 4H-SiC was investigated. First, a statistical current-voltage (I-V) analysis in forward bias, performed on a set of equivalent diodes, showed a symmetric…

We show the operation of a Cu/Al_2O_3/Cu/n-Si hot-electron transistor for the straightforward determination of a metal/semiconductor energy barrier height even at temperatures below carrier-freeze out in the semiconductor. The hot-electron…

Schottky barriers are often formed at the semiconductor/metal contacts and affect the electrical behaviour of semiconductor devices. In particular, Schottky barriers have been playing a major role in the investigation of the electrical…

In this work we study the Schottky barrier height (SBH) at the junction between $\beta$-Ga$_2$O$_3$ and platinum, a system of great importance for the next generation of high-power and high-temperature electronic devices. Specifically, we…

An aluminum nitride (AlN) Schottky barrier diode (SBD) was fabricated on a nonpolar AlN crystal grown on tungsten substrate by physical vapor transport. The Ni/Au-AlN SBD features a low ideality factor n of 3.3 and an effective Schottky…

Realizing an optimal Schottky interface of graphene on Si is challenging, as the electrical transport strongly depends on the graphene quality and the fabrication processes. Such interfaces are of increasing research interest for…

The Schottky barrier height (SBH) is mapped with nanoscale resolution at pure Au/Si(001) and mixed Au/Ag/Si(001) interfaces utilizing ballistic electron emission microscopy (BEEM) by acquiring and fitting spectra every 11.7 nm over a 1…

In order to develop a method to extract the parameters of the two inherent Schottky contacts from a single current-voltage (I-V) characteristic curve, the I-V characteristics of metal-semiconductor-metal (MSM) diodes with asymmetric…

In this work, we describe the charge transport in two-dimensional (2D) Schottky barrier field-effect transistors (SB-FETs) based on the carrier injection at the Schottky contacts. We first develop a numerical model for thermionic and…

The low temperature electrical behavior of adjacent silicide/Si Schottky contacts with or without dopant segregation is investigated. The electrical characteristics are very well modeled by thermionic-field emission for non-segregated…

We present first-principles calculations of Schottky barrier heights (SBHs) at interfaces relevant for silicon-based merged-element transmon qubit devices. Focusing on Al(111)/Si(111) and CoSi$_2$(111)/Si(111), we consider various possible…

Cryogenic low noise amplifiers based on high electron mobility transistors (HEMTs) are widely used in applications such as radio astronomy, deep space communications, and quantum computing, and the physical mechanisms governing the…

Internal photoemission spectroscopy was used to determine the Schottky barrier height in rectifying SrRuO3/Nb-doped SrTiO3 junctions for 0.01 wt % and 0.5 wt % Nb concentrations. Good agreement was obtained with the barrier height deduced…

Accurate prediction of Schottky barrier heights (SBHs) at metal-semiconductor (M-SC) interfaces is essential for understanding and optimizing charge injection in electronic and optoelectronic devices. However, first-principles calculations…

The newly emerging class of atomically-thin materials has shown a high potential for the realisation of novel electronic and optoelectronic components. Amongst this family, semiconducting transition metal dichalcogenides (TMDCs) are of…

The Schottky barrier of a metal-semiconductor junction is one of the key quantities affecting the charge transport in a transistor. The Schottky barrier height depends on several factors, such as work function difference, local atomic…

Due to Fermi level pinning (FLP), metal-semiconductor contact interfaces result in a Schottky barrier height (SBH), which is usually difficult to tune. This makes it challenging to efficiently inject both electrons and holes using the same…

Ga2O3 Schottky barrier diodes featuring a field plate and a composite SiO2/SiNx dielectric layer beneath the field plate were fabricated, achieving a breakdown voltage of 2.4 kV at room temperature. Electrical performance and degradation…