相关论文: The Effect of Different Wavelengths on Porous Sili…

Porous silicon (PSi) layers has been prepared in this work via photoelectrochemical (PEC) etching process of an n type silicon wafers of two resistivities (3.5 ohm.cm and 0.02 ohm.cm) in hydrofluoric (HF) acid of 24.5 precent…

In this work the effects of coherent radiation (Laser) and incoherent radiation (Halogen lamp) during the electrochemical etching process on the structural characteristics of n-type PSi samples were investigated. The porosity values were…

A comparison of porous structures formed from silicon (Si) wafers with different resistivities has been reported here based on the morphological studies carried out using scanning electron microscope (SEM). The porous Si samples have been…

Theoretically and experimentally we have proved the existence of optimal thickness of the porous layer used as an anti-reflection coating in solar cells. We have taken into account the joint mechanisms of generation and recombination of…

There are a few methodologies to monitoring the Porous Silicon (PS) formation in-situ. One of these methodologies is photoacoustic. Previous works that reported the use of photoacoustic to study the PS formation do not provide the physical…

We report the fabrication of diverse light guiding structures embedded in oxidised porous silicon (OPS) by means of patterned pore filling through a single photoresist mask. The pores of OPS were filled with KDP salt from unsaturated…

Efficient anti-reflection coatings (ARC) improve the light collection and thereby increase the current output of solar cells. By simple electrochemical etching of the Si wafer, porous silicon (PS) layers with excellent broadband…

Within this work, the kinetics of the growing stage of porous silicon (PS) during the etching process was studied using the photoacoustic technique. A p-type Si with low resistivity was used as a substrate. An extension of Rosencwaig and…

We report fabrication of optical waveguides embedded in oxidised porous silicon in a mask-less process. Patterned pore-filling was attained by means of inkjet printing, enabling lateral modification of the waveguide's index of refraction…

The enhancement of Er$^{3+}$-based up-conversion for photovoltaics in multilayer porous silicon photonic structures is considered theoretically and experimentally. Transfer matrix simulations are used to assess the increased photonic…

The article addresses the thermophysical properties of porous silicon (PS) samples produced through electrochemical (EC), metal-assisted chemical (MACE), and combined (MACE + EC) etching methods. The PS/MACE+EC sample's thermophysical…

Layered optical devices with a lateral gradient can be fabricated through electrochemical synthesis of porous silicon (PS) using a position dependent etching current density $\bm j(\bm r_\|)$. Predicting the local value of $\bm j(\bm r_\|)$…

Electrochemical etching of silicon in hydrofluoride containing electrolytes leads to pore formation for low and to electropolishing for high applied current. The transition between pore formation and polishing is accompanied by a change of…

The photonic density of states (PDS) of eigen polarizations (EPs) in cholesteric liquid crystal (CLC) cells with a defect layer inside are calculated. The dependences for the PDS and light intensity in the defect layer on the parameters…

Silicon (Si) nanoparticles (NPs) were synthesized by transforming Si wafer surface to ammonium silicon hexafluoride (ASH) or (NH4)2SiF6 under acid vapor treatment. Si-NPs are embedded within the polycrystalline (ASH) layer formed on the Si…

We propose a new class of photonic devices based on periodic stress fields in silicon that enable second-order nonlinearity as well as quasi-phase matching. Periodically-poled silicon (PePSi) adds the periodic poling capability to silicon…

We have fabricated highly-luminescent samples with erbium-doped amorphous silicon sub-oxide (a-SiOx<Er>) layers on SiO2/Si substrates. The layers are designed to provide a resonance with large modal overlap with the active material and with…

Monocrystalline silicon solar cells with photo-absorbing morphology can amplify light-trapping properties within the absorber layer and help to fabricate cost-effective solar cells. In this paper, the effect of different parameters namely…

Silicon nanowires are prepared by the method of the two-step metal-assisted wet chemical etching. We have analyzed the structure of solid, rough and porous nanowire surfaces of boron-doped silicon substrates with resistivities of \rho >…

We performed X-ray photoelectron spectroscopy (XPS) measurements on a thin film of Si nanocrystals (SiNCs) while applying DC or AC external biases to extract the resistance and the capacitance of the thin film. The measurement consists of…