相关论文: High quality factor mg-scale silicon mechanical re…
We characterize the mechanical quality factor of micro-oscillators covered by a highly reflective coating. We test an approach to the reduction of mechanical losses, that consists in limiting the size of the coated area to reduce the strain…
We describe the measurement and modeling of amplitude noise and phase noise in ultra-high Q nanomechanical resonators made from stoichiometric silicon nitride. With quality factors exceeding 2 million, the resonators' noise performance is…
We demonstrate the active tuning of all-dielectric metasurfaces exhibiting high-quality factor (high-Q) resonances. The active control is provided by embedding the asymmetric silicon meta-atoms with liquid crystals, which allows the…
This work reports an acoustic solidly mounted resonator (SMR) at 18.64 GHz, among the highest operating frequencies reported. The device is built in scandium aluminum nitride (ScAlN) on top of silicon dioxide (SiO2) and tantalum pentoxide…
Opto-mechanical systems have enabled wide-band optical frequency conversion and multi-channel all-optical radio frequency amplification. Realization of an on-chip silicon communication platform is limited by photodetectors needed to convert…
Recently introduced Surface Nanoscale Axial Photonics (SNAP) makes it possible to fabricate high Q-factor microresonators and other photonic microdevices by dramatically small deformation of the optical fiber surface. To become a practical…
We present a new class of high-Q tunable microresonators formed at the intersection of two straight silica optical fibers, whose free spectral range (FSR) can be widely tuned by fiber rotation. The proposed configuration avoids the…
We report on the design, fabrication, and implementation of ultrasensitive micromechanical oscillators. Our ultrathin single-crystal silicon cantilevers with integrated magnetic structures are the first of their kind: They are fabricated…
Optical parametric oscillators (OPOs) have been widely used for decades as tunable, narrow linewidth, and coherent light sources for reaching long wavelengths and are attractive for applications such as quantum random number generation and…
Magnetic Resonance Force Microscopy (MRFM) enables three-dimensional imaging of nuclear spin densities in nanoscale objects. Based on numerical simulations, we evaluate the performance of strained SiN resonators as force sensors and show…
We have developed a system for tapered fiber measurements of optomechanical resonators inside a dilution refrigerator, which is compatible with both on- and off-chip devices. Our apparatus features full three-dimensional control of the…
We describe the fabrication and measurement of microwave coplanar waveguide resonators with internal quality factors above 10 million at high microwave powers and over 1 million at low powers, with the best low power results approaching 2…
We demonstrate a new type of optomechanical system employing a movable, micron-scale waveguide evanescently-coupled to a high-Q optical microresonator. Micron-scale displacements of the waveguide are observed for milliwatt(mW)-level optical…
We present a theoretical and experimental study of superconducting ring resonators as an initial step toward their implementation in superconducting electronics and quantum technologies, with promising applications including superconducting…
This thesis describes the development of an ultra-low noise sapphire resonator oscillator that is tunable over X-band. While undertaking this task the author has explained some interesting and very useful phenomena in regards to the design…
We propose and design a stoichiometric silicon-nitride membrane resonator featuring highly reflective at multi-wavelengths and high mechanical quality factor. The membrane resonator has a thickness of 100 nm and 2D-photonic and phononic…
The coherent manipulation of acoustic waves on the nanoscale usually requires multilayers with thicknesses and interface roughness defined down to the atomic monolayer. This results in expensive devices with predetermined functionality.…
The nanocrystallite have the finite number of the oscillation modes. Their number increases proportionally to a cube of the characteristic size. Thus the oscillation spectrum of nanocrystal becomes discrete, and the separate modes of…
The quality factor ($Q$ factor) of nanomechanical resonators is influenced by geometry and stress, a phenomenon called dissipation dilution. Studies have explored maximizing this effect, leading to softly-clamped resonator designs. This…
We observe parametric amplification of electromagnetic (EM) waves produced by a flux-flow oscillator made of YBa2Cu3O7 Josephson junctions arrays coupled to the resonant modes of a millimeter wave Fabry-Perot resonator at a pump frequency…